Toshiba B-443 owner manual Ribbon Loading Instructions

Page 21

EO1-33013

3.4Ribbon Loading Instructions

1.Place an empty paper core on the ribbon rewind spindle.

2.Install the ribbon on the ribbon supply spindle.

3.Disengage the printer carriage.

4.Pull the ribbon leader to the front from beneath the printer carriage. Attach the ribbon leader to the ribbon rewind paper core.

5.Rotate the ribbon rewind roller until the ribbon leader is thoroughly, firmly encompassed by the black section of the ribbon.

6.Engage the printer carriage.

7.Close the printer cover and press the FEED button until the green ON-LINELED illuminates.

14

Image 21
Contents 443 List of Standards of Conformity EO1-33013 Contents Options Supplies Label Stock Ribbon Meanings of Each Symbol Safety SummaryPrecautions Compliances Product IntroductionEquipment Checklist Applicable ModelUnpacking and Inspection EO1-33013 Top front view Printer PartsInterior view Rear view External label roll mount External Label Roll MountButtons and Indicators Loading Label and Tag Stock Setting Up the PrinterInserting label supply roll into label roll mount Feed labels through adjustable label guide Self-Peeling Function Setting up printer for self-peeling functionPrinter ready for self-peeling function Ribbon Loading Instructions Placement of ribbon supply roll Installation of label stock and thermal transfer ribbon Installation of external label roll mount Install External Label Roll MountInstallation of memory module Option Install Memory ModuleSelf Test Dump Mode Power-on Utilities Self Test UtilityGap Sensor Calibration Utility Printer Initialization Parameter Default Value Cleared by InitializationError Messages Problem Solution Troubleshooting GuideIndicators and Buttons SpecificationsPower Requirements PrinterOptions EnvironmentPrinter Body Supplies Label StockRibbon