![](/images/new-backgrounds/1095103/9510329x1.webp)
Preparing for Operation | Setting Up the Telephone |
Step by Step
|
|
| : | |
| 01=DHCP IP assign? | > | ||
> |
|
|
| : |
off? | > |
|
> |
|
| : |
02=Terminal IP addr.? | > | ||
|
|
| : |
| Change? | > | |
|
|
| o |
:
>03=Terminal mask? > :
|
|
| : |
| Change? | > | |
|
|
| o |
|
| : | |
> |
|
| : |
00=End? | > |
Only if no DHCP server:
Confirm.
Confirm to switch the DHCP IP assign off. The change is displayed.
Choose and confirm.
Confirm.
Enter IP address of the optiPoint 410/420 (to edit see Æ page 93).
Confirm. The IP address is displayed.
Choose and confirm.
Confirm.
Enter terminal mask of the optiPoint 410/420 (to edit see Æ page 94).
Confirm. The terminal mask is displayed.
Choose and confirm to go to the top level of the config- uration menu.
In all configuration types
Enter Gateway address for communication with the HiPath System via the gateway. Entering only possible via
Menu System > Gateway settings, see Æ page 55.
Enter Registration subscriber number (extension number). The extension number must be stored in the HiPath system. Entering only possible via
Menu System > Gateway settings, see Æ page 55.
Troubleshooting
If the optiPoint 410 economy/economy plus/standard/ advance and optiPoint 420 advance does not function after making the described configuration, the failure can be attributed to peculiarities of the network environ- ment.
More information on error detection is available in the "Start up not successful" Æ page 91.
15