![](/images/new-backgrounds/1095103/95103155x1.webp)
Alphabetical Reference | Description of functions |
SNMP Server Address
•If an Æ SNMP server exists in the network, enter the Æ IP address of this server here.
•Standard address Æ page 96.
Æ page 53
SNMP Trap Port
•Define the Æ Port here through which the Æ SNMP error messages should be transmitted.
Æ page 53
SRSR Automatic Switch Back
•Activate this checkbox for executing automatical change between standby mode (emergency mode) and home mode (standard mode) of the communication plattform.
Æ page 57
SRSR Enabled
•Activate this checkbox if two communication plattforms are used
•Æ Gateway Address and Æ Subscriber Number of the Standby Æ PBX must be entered Æ page 55.
Æ page 57
SRSR Switch To Home Expiry Timeout
•Required waiting time for change from standby mode (emergency mode) to home mode (standard mode). During this time a switch over is not possible.
•Valid values: 1 ... 255.
•Standard valueÆ page 96.
Æ page 57
SRSR Switch To Home Retry Count
•Maximum number of negative attempts for switching over from home mode (standard mode) to standby mode (emergency mode).
•Valid values: 1 ... 255.
•Standard valueÆ page 96.
Æ page 57
SRSR Switch To Standby Expiry Timeout
•Required waiting time for change from home mode (standard mode) to standby mode (emergency mode). During this time a switch over is not possible.
•Valid values: 1 ... 255.
•Standard valueÆ page 96.
Æ page 57
78