Siemens 2000 manual Technical data, Binary encoded Ascii table, 101

Page 101

Binary encoded ASCII table

Technical data

Technical data

optiPoint 410/420 economy/economy plus/standard/advance

Protocols

H.323, H.225, H.245,

 

TCP/IP, FTP, DHCP, SNTP, SRTP/SRTCP[[1]]

 

Gatekeeper routed and direct routed call model

 

 

Voice algorithms

G.711 (64 kbit/s),

 

G.723.1 (6,4 kbit/s)

 

Room echo compensation

 

 

Interfaces

IEEE 802.3 Fast Ethernet (10/100 Mbit/s)

 

2 x RJ 45 TP

 

 

Pin assignment:

 

LAN receptacle

Pin 1 TX +

 

Pin 2 TX -

 

Pin 3 RX +

 

Pin 4 -- (DC+)

 

Pin 5 -- (DC+)

 

Pin 6 RX -

 

Pin 7 -- (DC-)

 

Pin 8 -- (DC-)

Handset receptacle

Pin 1 microphone -

 

Pin 2 receiver cap +

 

Pin 3 receiver cap -

 

Pin 4 microphone +

Power supply

Pin 1 V -

unit receptacle

Pin 2 --

 

Pin 3 --

 

Pin 4 --

 

Pin 5 --

 

Pin 6 V +

 

 

Power supply

EU-variant, grounding plug (230 V, 50 Hz)

(external plug-in

UK-variant (230 V, 50 Hz)

power supply unit)

US-variant (110 V, 60 Hz)

 

 

[1]Only for optiPoint 410/420 economy plus/standard/advance with software version 5.x or higher on HiPath 3000/5000 (version 6.0 or higher) and HiPath 4000 (version 3.0 or higher).

101

Page 100 Page 102
Image 101
Page 100 Page 102
Contents HiPath Administrator ManualFor Your Safety Safety PrecautionsSafety Precautions Protection of the TelephoneImportant Notes Location of the TelephoneContents Factory Default Settings Administration scenariosAlphabetical Reference EditorsIndex Data Visualisation optiPoint 410 entry onlyAbout the Manual General InformationProduct Identification Echo EffectGeneral Information Safety Precautions for IP TelephonyVoIP Security Reference to operation steps SafetyS o uor Operating the telephoneOptiPoint 410/420 economy/economy plus/stan- dard/advance OptiPoint 410 entryModel Properties of the Telephone ModelsVoIP Security Connectors on the bottom of the telephone Setting Up the TelephoneInstalling the Telephone Starting up the optiPoint 410/420 Installing the TelephonePreparing for Operation Entering the administration areaOnly if no Dhcp server TroubleshootingAll configuration types 2nd Function key OptiPoint 410 entry1st Function key Only if you are working in a Virtual LAN Vlan Enter IP address of the optiPoint 410 entry to edit see ÆOther settings Error handlingAdministration AdministrationRemote maintenance through LAN Locally on the telephonePress keys simultaneously Access to the Administration MenuOptiPoint 410/420 economy/ economy plus/standard/advance OptiPoint 410/420 economy/economy plus/standard/advance ConfigurationsDhcp IP Assignment Terminal IP AddressVlan ID Default RouteVlan Method QoS Layer Options LAN Port 1 ModeSubscriber Number LAN Port 2 ModeSubscriber Password LED Test DiagnosticsDisplay Test Audio Loop Test Key TestExecute test RAM TestPing change target Ping TestSLK Test Line StatusRestart By pulling the power plugWeb-based Management Tool After restartError Messages Other error messages OptiPoint 410 entry Entering the administration areaView settings Function Codes Reset factory settings LEDs on the phone No Default RouteNo terminal screen No IP Address is setNo Participant No. / password No Default Route is setNo terminal screen is set No networkLog in failed No PBX addressPBX does not react OptiPoint display module Firmware UpdateLdap Configuration OptiPoint display module Configuring the Ldap ServerInstalling the Ldap Template OptiPoint application module OptiPoint application module Installing an Ldap TemplateGeneral Web-based Management ToolWeb-based Management Tool PreparationOpen web-based management tool Http//IP of the telephoneWeb-based Management structure Change administrator password Administrator ActionsGeneral Information General InformationRestart terminal Factory Reset Clear screenlock passwordOnly for optiPoint 410/420 standard/advance available Clear user dataJava Http Settings Web-based Management ToolAdministrationLdap settings ApplicationsMiscellaneous WAP gatewayWAP Favourites Audio Audio settingsDiagnostic Tests Test results File transfer File Transfer optiPoint 410/420 entry/economy/economy plus Java FTP SettingsENB FTP Settings Network and Routing NetworkSnmp settings Quality of Service QoSQoS Data Collection System DLS Settings Gateway settingsPort Control Port SettingsTime Settings Voip Encryption Settings Srsr SettingsDescription of functions Alphabetical ReferenceAlphabetical Reference Action On SubmitCancel Mobility Password Administration PasswordApplication Filename Application VersionCodec Independent Threshold Values Codec Audio Mode UseCodec Compressing Codec Threshold Values CompressionDaylight saving Debug InterfaceDefault Vlan ID Default Sntp IPDhcp DLS Server PortDNS Addresses External Access CodeDomain Name DSM FilenameEmergency Number FTP PasswordFTP Account Name FTP Server AddressFTP Username FTP SettingsG722 codec Gateway AddressHttps International Dial Prefix Http UsernameIP Routing Java GatewayJitter Buffer L2 DefaultL2/L3 Voice/Signalling Bandwith Possible application LAN Port SettingsLanguage Ldap Server IP AddressTemplate-String Declaration Ldap template exampleSyntax of the Ldap template file Example for assumption Copy & PastePort Function LEDs on optiPoint 410/420 right row Ldap Template FilenameLocal Area Code MIB-II Error CountLocal Country Code Local District CodeNational Dial Prefix Minimal Session LengthNon-Compressing Codec Threshold Values Observation IntervalQCU Standby Address QCU Home AddressQDC Server QoS L2/L3Service Agent Report ModeRestart Terminal RTP Port BaseSnmp Srsr Enabled Srsr Automatic Switch BackSrsr Switch To Home Expiry Timeout Srsr Switch To Home Retry CountSrsr Tctest Expiry Timeout Srsr Switch To Standby Retry CountSrsr Tctest Retry Count System TypeTime Window Time SourceTimezone offset USB KeyboardWAP Username WAP PasswordWAP Connection Type WAP URL Cornet IP TS Abbreviations and Specialized TermsDLS DNSFTP ENBHFA HttpLdap LANLCD LEDPBX MIBPing PSSSLK SIPVlan SntpURL SwitchVoIP WAPSetting up the FTP server Administration scenariosSetting up the FTP server Administration scenarios Installation and configurationStart up not successful Check handset functionalitiesCheck LAN connection Determine the software versionImprove speech quality Number Editor EditorsIP Number Editor Number EditorBit Block Teminal Mask EditorEditors Text Editor Text EditorKey 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23x OptiPoint 410/420 economy/economy plus/standard/advanceFunction Standard value Factory Default SettingsStandard value Vlan Dhcp Vlan ID Password Function setting Password FunctionsTaste Funktion HiPath 3000/5000 Key-LayoutStatus Messages Data Visualisation optiPoint 410 entry onlyBinary encoded Ascii table Data Visualisation optiPoint 410 entry only101 Technical dataBinary encoded Ascii table 102 Technical dataOperation Codes Summary Administration InterfaceOptiPoint 410/420 OptiPoint 410/420Operation Codes Summary104 Operation Codes SummaryoptiPoint 410/420105 Further functionsOptiPoint 410 entryOperation Codes Summary 106 Menu structureMenu structureoptiPoint 410/420 107 IndexIndex 108 Https109 SrsrBestell-Nr. A31003-A2056-B415-7-76A9

2000 specifications

Siemens 2000 is a robust and advanced industrial automation system that exemplified Siemens' commitment to innovation and efficiency in manufacturing during its launch period. Known for its modular design and interoperability, Siemens 2000 leveraged the latest technologies to create a more integrated and flexible manufacturing environment.

One of the standout features of Siemens 2000 is its use of the S7 series programmable logic controllers (PLCs). These programmable devices allowed for real-time monitoring and control of various industrial processes. The S7 PLCs were designed to handle complex automation tasks while offering an intuitive programming interface through the STEP 7 software. This enabled operators to create and modify programs easily, enhancing responsiveness to production changes.

Another notable characteristic of Siemens 2000 is its emphasis on connectivity. The system utilized Industrial Ethernet for communication between devices, ensuring high-speed data transfer and reliable connections across the network. This facilitated a more cohesive integration of machinery and systems, leading to improved workflow and productivity. The support for various communication protocols, such as Profibus and Profinet, allowed for seamless integration into existing infrastructures.

Siemens 2000 also introduced features that enhanced data acquisition and processing through SCADA (Supervisory Control and Data Acquisition) systems. These capabilities provided operators with real-time insights into production metrics, enabling predictive maintenance and proactive decision-making. The combination of advanced analytics tools and human-machine interfaces (HMIs) allowed users to visualize data patterns easily, improving overall operational efficiency.

Safety was a paramount consideration in the design of Siemens 2000. The system included integrated safety features that complied with international standards, providing reliable protection for both personnel and equipment. These safety measures ensured that potential hazards were identified and mitigated, promoting a secure working environment.

In conclusion, Siemens 2000 represented a significant leap forward in industrial automation with its modular and flexible architecture. The integration of advanced PLCs, seamless connectivity through Industrial Ethernet, sophisticated data processing capabilities, and a strong focus on safety made it a preferred choice for manufacturers looking to enhance their productivity and operational excellence during its time. The legacy of Siemens 2000 continues to influence modern automation solutions, embodying the principles of efficiency, safety, and innovation.
Top Page Image Contents