Description of functions | Alphabetical Reference |
QCU Home Address
•Enter the Æ IP address of the
•Standard value Æ page 96.
Æ page 54
QCU Standby Address
•Only available when using a second communication platform.
•Enter the Æ IP address of the
Æ page 54
QDC Server
•Enter the Æ
•Standard value Æ page 96.
Æ page 56
QoS L2/L3
•The settings relate to the Æ Layer 2 and Æ Layer 3 areas of the Æ QoS, that regulate the prioritisation of the transferred data.
•For Layer 2, the Æ VLAN Method and the Æ Default VLAN ID can be changed. For Layer 3, the Æ L2/L3 Voice/Signalling can be changed.
•The activation of Layer 2 and / or Layer 3 support is meaningful only if the used Æ Switch can interpret this information (e.g., "Layer 2 Switch").
•Standard value Æ page 96.
Æ page 23 Æ page 53
QoS Protocol Version
•The Version Number gives information regarding the actuality of the QoS report file (read only).
Æ page 54
RAM Test
•Here you can test the Æ RAM memory of your optiPoint 410/420.
•The results are displayed after the test is over.
Æ page 26 Æ page 49
Report Interval
•Time interval (in sec.) in reports are sent.
•For each Report Interval a QoS report will be sent if the Æ Report Mode was set accordingly.
•Valid values: 10 ... 3600.
•Standard value Æ page 96.
Æ page 54
75