![](/images/new-backgrounds/1095103/95103151x1.webp)
Alphabetical Reference | Description of functions |
Report Mode
•Choose the according Report Mode:
–1: A report will be sent at the end of a session when the threshold was reached.
–2: A report will be sent within each Æ Report Interval when the threshold was reached.
–3: A report allways will be sent at the end of a session.
–4: A report allways will be sent within each Æ Report Interval.
Æ page 54
Restart Terminal
•Executes the restart of the optiPoint 410/420.
Æ page 46
ROM Test
•You can test the Æ ROM memory of your optiPoint 410/420.
•The results are displayed after the test is over.
Æ page 26
Æ page 49
RTP Port Base
•Use: Transfer of voice packets at Æ VoIP.
•Enter the Æ
Æ page 56
Service Agent
•Different PC applications contact the telephone via the Service Agent interface. The interface is used to determine which ports are utilized for further communication by these applications. Services dependent on an interface cannot be accessed if the interface is deactivated.
•The following ports can only be activated if the service agent is activat- ed:
–Probe Interface: This port is required for error searches in customer systems (test interface). It allows external feedback suggestions from messages to be entered in telephones thus enabling different scenarios to be tested.
–Test Interface: This function permits automatic regression tests. Key- strokes can be simulated and displays or audio statuses can be read out.
–CTI: This function provides classic dialing assistance (for example, via Windows dialing aid application).
–Resource Sharing: The PC mouse and keys can be used to control telephone applications (for example, DSM).
Æ page 56
76