Siemens 2000 manual Http Username, International Dial Prefix, IP Routing, Java Gateway

Page 67

Description of functions

Alphabetical Reference

HTTP Username

•Only configurable on optiPoint 410/420 standard/advance and only re- quired if a display module or application module will be used.

•Enter the name according to the user name stored in the Æ FTP-Server for accessing the FTP server.

•The name has to be applicable with the Æ HTTP Password.

•Valid values: 1 ... 24 characters.

•Standard-Name Æ page 96.

Æ page 47

International Dial Prefix

•Can be configured only for the optiPoint 410 standard/advance and optiPoint 420 advance.

•Specify the number that must be prefixed while dialling an international telephone number, e.g., "00".

•Standard value Æ page 96.

Æ page 47

IP Routing

•To have constant access to network subscribers of other domains, you can enter a total of two more network destinations.

•An Æ IP address of the domain and gateway, and a Æ Subnet Mask must be entered for each further domain you wish to use.

•Standard values Æ page 96.

Æ page 52

Java Gateway

•Only configurable on optiPoint 410/420 standard/advance and only re- quired if a display module or application module will be used.

•Enter the Æ Port-Nummer for communication with the Æ WAP-Server if used.

•Standard value Æ page 96.

Æ page 56

Java Midlet Filename

•Only configurable on optiPoint 410/420 standard/advance and only re- quired if a display module or application module will be used.

•Java Midlets are small applications (e. g. games or clock) for use with the display module or application module.

•The file must be available on the Æ FTP-Server in a defined folder (Æ FTP Server Address).

•Standard-Name Æ page 96.

•Download file Æ Action On Submit

Æ page 50

67

Page 66 Page 68
Image 67
Page 66 Page 68
Contents
HiPath Administrator ManualProtection of the Telephone Safety PrecautionsFor Your Safety Safety PrecautionsImportant Notes Location of the TelephoneContents Editors Administration scenariosFactory Default Settings Alphabetical ReferenceIndex Data Visualisation optiPoint 410 entry onlyEcho Effect General InformationAbout the Manual Product IdentificationVoIP Security Safety Precautions for IP TelephonyGeneral Information Reference to operation steps SafetyOptiPoint 410 entry Operating the telephoneS o uor OptiPoint 410/420 economy/economy plus/stan- dard/advanceVoIP Security Properties of the Telephone ModelsModel Installing the Telephone Setting Up the TelephoneConnectors on the bottom of the telephone Starting up the optiPoint 410/420 Installing the TelephonePreparing for Operation Entering the administration areaAll configuration types TroubleshootingOnly if no Dhcp server 1st Function key OptiPoint 410 entry2nd Function key Only if you are working in a Virtual LAN Vlan Enter IP address of the optiPoint 410 entry to edit see ÆOther settings Error handlingLocally on the telephone AdministrationAdministration Remote maintenance through LANOptiPoint 410/420 economy/ economy plus/standard/advance Access to the Administration MenuPress keys simultaneously Terminal IP Address ConfigurationsOptiPoint 410/420 economy/economy plus/standard/advance Dhcp IP AssignmentVlan Method Default RouteVlan ID QoS Layer Options LAN Port 1 ModeSubscriber Password LAN Port 2 ModeSubscriber Number Display Test DiagnosticsLED Test RAM Test Key TestAudio Loop Test Execute testPing change target Ping TestSLK Test Line StatusAfter restart By pulling the power plugRestart Web-based Management ToolError Messages Other error messages View settings Entering the administration areaOptiPoint 410 entry Function Codes Reset factory settings No IP Address is set No Default RouteLEDs on the phone No terminal screenNo network No Default Route is setNo Participant No. / password No terminal screen is setPBX does not react No PBX addressLog in failed Ldap Configuration Firmware UpdateOptiPoint display module Installing the Ldap Template Configuring the Ldap ServerOptiPoint display module OptiPoint application module OptiPoint application module Installing an Ldap TemplateGeneral Web-based Management ToolHttp//IP of the telephone PreparationWeb-based Management Tool Open web-based management toolWeb-based Management structure General Information Administrator ActionsChange administrator password General InformationClear user data Clear screenlock passwordRestart terminal Factory Reset Only for optiPoint 410/420 standard/advance availableApplications Web-based Management ToolAdministrationJava Http Settings Ldap settingsWAP Favourites WAP gatewayMiscellaneous Diagnostic Tests Test results Audio settingsAudio File transfer ENB FTP Settings Java FTP SettingsFile Transfer optiPoint 410/420 entry/economy/economy plus Network and Routing NetworkSnmp settings Quality of Service QoSQoS Data Collection System DLS Settings Gateway settingsPort Control Port SettingsTime Settings Voip Encryption Settings Srsr SettingsAction On Submit Alphabetical ReferenceDescription of functions Alphabetical ReferenceApplication Version Administration PasswordCancel Mobility Password Application FilenameCodec Codec Audio Mode UseCodec Independent Threshold Values Debug Interface CompressionCompressing Codec Threshold Values Daylight savingDLS Server Port Default Sntp IPDefault Vlan ID Dhcp DSM Filename External Access Code DNS Addresses Domain NameFTP Server Address FTP PasswordEmergency Number FTP Account NameGateway Address FTP SettingsFTP Username G722 codecHttps Java Gateway Http UsernameInternational Dial Prefix IP RoutingL2/L3 Voice/Signalling L2 DefaultJitter Buffer Ldap Server IP Address LAN Port SettingsBandwith Possible application LanguageTemplate-String Declaration Ldap template exampleSyntax of the Ldap template file Example for assumption Copy & PastePort Function LEDs on optiPoint 410/420 right row Ldap Template FilenameLocal District Code MIB-II Error CountLocal Area Code Local Country CodeObservation Interval Minimal Session LengthNational Dial Prefix Non-Compressing Codec Threshold ValuesQoS L2/L3 QCU Home AddressQCU Standby Address QDC ServerRTP Port Base Report ModeService Agent Restart TerminalSnmp Srsr Switch To Home Retry Count Srsr Automatic Switch BackSrsr Enabled Srsr Switch To Home Expiry TimeoutSystem Type Srsr Switch To Standby Retry CountSrsr Tctest Expiry Timeout Srsr Tctest Retry CountUSB Keyboard Time SourceTime Window Timezone offsetWAP Connection Type WAP PasswordWAP Username WAP URL DNS Abbreviations and Specialized TermsCornet IP TS DLSHttp ENBFTP HFALED LANLdap LCDPSS MIBPBX PingSntp SIPSLK VlanWAP SwitchURL VoIPSetting up the FTP server Administration scenariosSetting up the FTP server Administration scenarios Installation and configurationDetermine the software version Check handset functionalitiesStart up not successful Check LAN connectionImprove speech quality Number Editor EditorsNumber Editor IP Number EditorEditors Teminal Mask EditorBit Block OptiPoint 410/420 economy/economy plus/standard/advance Text EditorText Editor Key 10x 11x 12x 13x 14x 15x 16x 17x 18x 19x 20x 21x 22x 23xStandard value Factory Default SettingsFunction Standard value Vlan Dhcp Vlan ID Password Function setting Password FunctionsTaste Funktion HiPath 3000/5000 Key-LayoutData Visualisation optiPoint 410 entry only Data Visualisation optiPoint 410 entry onlyStatus Messages Binary encoded Ascii tableBinary encoded Ascii table Technical data101 102 Technical dataOptiPoint 410/420Operation Codes Summary Administration InterfaceOperation Codes Summary OptiPoint 410/420104 Operation Codes SummaryoptiPoint 410/420OptiPoint 410 entryOperation Codes Summary Further functions105 Menu structureoptiPoint 410/420 Menu structure106 Index Index107 108 Https109 SrsrBestell-Nr. A31003-A2056-B415-7-76A9
Top Page Image Contents