![](/images/new-backgrounds/1095103/95103123x1.webp)
Alphabetical Reference | Description of functions |
Default Route
•Enter the Æ IP address that was assigned to your Æ PBX if no Æ DHCP server assigns this value dynamically.
•If the value was assigned dynamically, it can only be read.
•A restart is necessary after the change.
•Standard value Æ page 96.
•IP editor in the optiPoint 410/420 Æ page 93.
Æ page 22
Æ page 17
Æ page 52
Default SNTP IP
•This entry is only required if you selected "SNTP" in the Æ Time Source field.
•Enter the Æ IP address of the Æ SNTP server.
Æ page 57
Default VLAN ID
•Can be defined only if the Æ Layer 2 support is activated Æ QoS L2/L3.
•Enter a value from 0 to 4095 here. This value describes the association with a certain VLAN, if a Æ VLAN is used.
Æ page 22
Æ page 17
Æ page 52
DHCP
•Activate this option if the required IP data of the telephone should be assigned dynamically by a Æ DHCP server.
•If no DHCP server is available in the IP network, please deactivate this option. In this case, the data corresponding to the Æ Terminal IP Ad- dress, Æ Terminal Mask and Æ Default Route must be defined manu- ally.
•A restart is necessary after the change.
•Standard value Æ page 96.
Æ page 21
Æ page 17
Æ page 52
Display Test
•Conduct this test to check the function of the Æ LCD display in the Dis- play telephone.
•Different display contents are displayed with the <and >keys.
Æ page 25
DLS Server Port
•Enter the Æ
Æ page 56
DLS Server Address
•Enter theÆ IP address of the Æ
Æ page 55
62