![](/images/new-backgrounds/1095103/9510377x1.webp)
optiPoint display module | Administration |
Step by Step
Configuring the LDAP Server
Perform the following steps to enter the LDAP server IP address and port number:
1.Start the
Æpage 43.
2.Select "Administration" > [password] > "Applica- tions" > "LDAP", see Æ page 47.
3.Enter the IP address of the LDAP server, see
Æpage 69.
4.Select "Submit".
5.Select "System" > "Port Settings", see Æ page 56.
6.Enter the port number for communication with the LDAP server, see Æ page 69.
7.Select "Submit".
Installing the LDAP Template
A standard template is already installed. You can also install a template that corresponds to your personal criteria. See Æ page 70 for an example of this template.
Perform the following steps to transfer a template to your optiPoint display module:
1.Make sure that an FTP server is available (see
Æpage 89) and that the relevant template file is stored on the server.
2.Start the
Æpage 43.
3.Select "Administration" > [password] > "File Trans- fer", see Æ page 50.
4.Enter the following parameters:
–FTP server address, see Æ page 64
–FTP account name, see Æ page 64
–FTP username, see Æ page 65
–LDAP template filename, see Æ page 72
5.Select "Download LDAP template" from the "Action on submit" field, see Æ page 58.
6.Select "Submit".
39