Diagnostics over Industrial Ethernet
Windows 2000 – DLC Protocol Installation
●Select Start -> Settings -> Control Panel.
●Click on the "Network and
●From the list of network adapters, select the adapter for which you are going to install the DLC protocol by right clicking on the required network adapter and going to "Properties".
●Click on the "Install" button and select "Protocol".
●Click on the "Add" button and select the DLC Protocol from the protocols.
●Confirm your selection with "OK".
Note
Make sure you have your Windows CD at hand. You may need to reinstall Windows service packs.
Windows XP – DLC Protocol Installation
For Windows XP, the DLC Protocol must be installed extra since it is not included with the operating system. The supplied CD, however, contains a
Note
You will information on the installation procedure in the "win_xp_readme.rtf" file.
50 | Industrial Ethernet |