Toshiba B-EV4T SERIES, EO1-33087 A1.2 Options, A1.3 Media, A1.3.1 Media Type, Label, Tag paper

APPENDIX 1 SPECIFICATIONS

ENGLISH VERSION EO1-33087

A1.2 Options

A1.2 Options

Option Name	Type
AC Adapter Cover	B-EV904-AC-QM-R
Cutter module	B-EV204-F-QM-R
	B-EV204-P-QM-R
Strip module	B-EV904-H-QM-R
External media roll hanger	B-EV904-PH-QM-R

Description

Attached to the printer bottom for housing the AC adapter.

A cutter unit that makes full cuts. A cutter unit that makes partial cuts.

When attached to the front of the Media Outlet, this module allows the on-demand strip issue by detecting the presence or lack of a label.

When this option is attached to the printer, a media roll with an outer roll diameter up to 203mm (8”) and inner core diameter of 76.2mm (3”) can be used.

NOTE:

The above options are available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.

A1.3 Media

Please make sure that the media to be used is approved by TOSHIBA TEC. The warranties do not apply to problems caused by using media that is not approved by TOSHIBA TEC.

For information regarding TOSHIBA TEC-approved media, please contact a TOSHIBA TEC authorised representative.

A1.3.1 Media Type

The table below shows the size and shape of the media that can be used on this printer.

Label	Black Mark	Tag paper	Black Mark
	(on reverse side)		(on reverse side)

	g	g
	Cut position
	e	e
	f
d	Feed Direction	h
c		d
		c

EA1- 3