Toshiba B-EV4T SERIES A1.3.3 Detection Area of the Reflective Sensor, A1.3.4 Effective Print Area

APPENDIX 1 SPECIFICATIONS

ENGLISH VERSION EO1-33087

A1.3 Media

A1.3.3 Detection Area of the Reflective Sensor

The Reflective Sensor is movable within the full range of the media width.

The reflection factor of the Black Mark must be 10% or lower with a waveform length of 950 nm. The Reflective Sensor should be aligned with the centre of the Black Mark.

Sensor should be positioned at the centre of the black mark.

Min. 2 mm

Min. 8 mm

Detecting the black marks on the back.

Media feed direction

Sensor is movable within the full range.

A1.3.4 Effective Print Area

The figure below illustrates the relation between the head effective print width and media width. (for GS14 Type)

	Out of print range		Print head element			Out of print range
			108.0 mm±0.2mm
		2 mm	(Head Effective Print Range)	2 mm
			112.0 mm (Max. media width)
(for TS14 Type)
							Out of print range
	Out of print range		Print head element
			106.0 mm±0.2mm
		3 mm	(Head Effective Print Range)		3 mm

112.0 mm (Max. media width)

EA1- 5