Toshiba EO1-33087, B-EV4T SERIES owner manual Platen/Sensors, Cover, Media Housing

Page 33

3. MAINTENANCE

ENGLISH VERSION EO1-33087

3.1 Cleaning

3.1.2 Platen/Sensors	1.	Wipe the Platen with a soft cloth moistened with absolute ethyl
	2.	alcohol.
	2.	Remove dust or paper particles from wipe the Black Mark Sensor,
		Feed Gap Sensor, and Cover Open Sensor with a dry soft cloth.

Feed Gap Sensor

Platen

Cover Open Sensor

Black Mark Sensor

3.1.3 Cover

CAUTION!

Do not use any volatile solvents including thinner and benzene, as this may cause discoloration or distortion of the cover.

Wipe the Cover with a dry soft cloth. Wipe off dirt with a soft cloth slightly moistened with mild detergent solution.

3.1.4 Media Housing	Wipe the media housing with a dry soft cloth. Wipe off dirt with a soft
	cloth slightly moistened with mild detergent solution.

E3- 2

Image 33

Contents EV4T Series Vorsicht CE Compliance for EU onlyMeanings of Each Symbol Safety SummaryRequest Regarding Maintenance PrecautionsTable of Contents Glossaries EA2-1Product Overview Introduction Features Unpacking AccessoriesSVT H05VV-F When purchasing the power cordDimensions Front ViewRear View Interior Printer status Button and Indicator LampPrecautions Printer SetupProcedure before Operation Turning the PrinterTurning on the Printer Turning OFF the Printer Connecting the Cables to the Printer Connecting the Power Adapter and the Power Cord Opening/Closing the Top Cover To open the Top CoverTo close the Top Cover Loading the Media Open the Media Holders 1 Media Sensor Calibration Batch mode How to set the media Strip mode OptionCut mode Option How to Load Fanfold Paper StockExternal Media Roll Hanger Option Broken Loading the RibbonPrint Head Block Ribbon Access Cover Close the Ribbon Access Cover until it clicks Test, and Dump Mode different type Utilities Media SensorMedia Sensor Calibration Print test label sample Self Print Test and Dump ModeE2-19 How to Use an SD Card „ Inserting an SD Card„ Removing an SD Card Maintenance CleaningPrint Head Media Housing Platen/SensorsCover Option Care/Handling of the Media and RibbonTroubleshooting Guide TroubleshootingStatus Lamp Color Status Cause SolutionsRemoving Jammed Media A1.1 Printer Appendix 1 SpecificationsEV4T-TS14-QM-R A1.3 Media A1.2 OptionsA1.3.1 Media Type LabelA1.3.2 Detection Area of the Transmissive Sensor A1.3.4 Effective Print Area A1.3.3 Detection Area of the Reflective SensorFigure below shows the effective print area on the media A1.4 RibbonInterface Cables Appendix 2 InterfaceBar code GlossariesSupply Page EO1-33087