Toshiba 120/150 manual Operation Panel

OPERATION PANEL

1 2 3 4 5 6 7 8 9 10

11 12

￿ONLINE key and indicator (p. 7-15)

Lights up when the unit is used as a printer and scanner. For description of the ON LINE indicator, see “INDICATORS ON THE OPERATION PANEL” (p. 7-15)

￿SCANNER key and indicator (p. 7-15, 7-22)

￿Copy ratio selector key and indicators

Use to sequentially select preset reduction/ enlargement copy ratios. Selected copy ratio is shown by a lit indicator. (p. 3-8)

￿Copy ratio display (%) key (p. 3-8)

￿Display

Displays the specified copy quantity, zoom copy ratio, user program code, and error code.

￿Alarm indicators

Developer replacement required indicator (p. 6-7)

Misfeed indicator (p. 6-4)

Toner cartridge replacement required indicator (p. 5-2)

Maintenance indicator (p. 6-7)

￿ADF indicator (p. 8-5)

￿ADF misfeed indicator (p. 8-6)

￿Exposure mode selector key and indicators Use to sequentially select the exposure modes: AUTO, MANUAL or PHOTO. Selected mode is shown by a lit indicator. (p. 3-7)

￿Power save indicator

Lights up when the unit is in a power save mode. (p. 4-21, 4-22)

13 14 15 16 17

￿ZOOM keys and indicator

Use to select any reduction or enlargement copy ratio from 25% to 400% in 1% increments. (p. 3-8)

￿Copy quantity keys

•Use to select the desired copy quantity (1 to 99). (p. 3-6)

•Use to make user program entries. (p. 4-3)

￿Tray select key

Use to select a paper feed station (paper tray 1, paper tray 2 or bypass tray). (p. 3-9)

￿Paper feed location indicators

Light up to show the selected paper feed station.

￿Light and dark keys and indicators

Use to adjust the MANUAL or PHOTO exposure level. Selected exposure level is shown by a lit indicator. (p. 3-6) Use to start and terminate user program setting. (p. 4-3)

￿Clear key

•Press to clear the display, or press during a copy run to terminate copying. (p. 3-6)

•Press and hold down during standby to display the total number of copies made to date. (p. 4-4)

￿Start key and indicator

•Copying is possible when the indicator is on.

•Press to start copying.

•Use to set a user program. (p. 4-3)

1-4INTRODUCTION