Toshiba 120/150 manual Using the ADF, Specifications

Page 86

Specifications

Acceptable originals

Weight:

52 to 90 g/m2 (14 to 23.9 lbs.)

 

Size:

A5 to A4 (5-1/2" x 8-1/2" to 8-1/2" x 14")

 

 

 

 

Capacity:

Up to 30 sheets

 

 

Power supply

Drawn from the copier

 

 

Weight

Approx. 3 kg (6.6 lbs.)

 

 

Dimensions

498 mm (W) x 380 mm (D) x 110 mm (H)

 

(19.6" (W) x 15" (D) x 4.3" (H))

 

 

 

As a part of our policy of continuous improvement, TOSHIBA reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.

Using the ADF

1.Make sure that no original is left on the original table.

2.Adjust the original guides to the size of originals.

3.Set the originals face up in the document feeder tray.

Before feeding originals in the document feeder tray, be sure to remove any staples or

paper clips from them.

Before placing curled or wavy originals into the document feeding tray, be sure to flatten them. If not, original misfeeds may result.

The ADF ( ) indicator on the operation panel will light up. If this indicator does not light up, the originals are not properly set or the ADF is not properly closed.

Badly damaged originals may misfeed in the ADF. It is recommended that such originals be copied from the original table.

Special originals such as transparency film should not be fed through the ADF, but should be placed directly on the original table.

8-5

Image 86
Contents Networking Documents %## FCC regulations Machine noise information User safetyOzone information For user in the CanadaVaroitus Page Important points when selecting an installation site Do not install your unit in areas that areDo not touch the photoconductive drum green portion Proper storage for suppliesTrademark acknowledgements Store paper in the wrapper and lying flatContents Appendix Page This chapter provides basic information for using the unit IntroductionUsing the Manual Conventions used in this manualPart Names Photoconductive drum Toner cartridgeOperation Panel Loading Paper Transparency Type of paper feeding Type of media Size WeightPaper FilmProper storage Loading the Paper Tray Gently push the paper tray back into the unit Bypass Feed including special paper Open the bypass tray and extend the trayPrint face 8LOADING Paper Making Copies Copy Flow Connecting the Power Cord Power onAbout the scan head Initial settings of operation panelPower off methods Original Placement Setting a large originalSET the Copy Quantity Exposure ADJUSTMENT/PHOTO CopyingExposure adjustment Automatic exposure adjustment To select a zoom ratio To select a preset copy ratioREDUCTION/ENLARGEMENT/ZOOM RatioSelecting the Tray Press the tray select Key10MAKING Copies Special Functions Toner Save Mode Description of Special FunctionsUser Programs Copies will appear in two steps, each with three digits Program Mode ParametersDisplaying Total Number of Copies Maintenance Toner Cartridge Replacement Or 5 times Shutter Toner seal 4MAINTENANCE Original table and the back side of the original cover Cleaning the UnitCabinet Transfer charger Troubleshooting the Unit Troubleshooting Problem Possible cause SolutionStatus Indicators Be sure to use only genuine Toshiba parts and suppliesMisfeed Removal Misfeed in the paper feed area Misfeed in the fusing areaLower the fusing unit release lever Start indicator will light up Misfeed in the transport areaDeveloper Required Maintenance RequiredWill go out and the start indicator will light up 8TROUBLESHOOTING Installing the Software Desktop Document Manager Software for the Toshiba Personal MFP SeriesMFP driver Button ManagerBefore Installation Hardware and Software RequirementsFlow of installation Operatingsystem Interface Reference pages for how to installDouble-click the setup icon Installing the SoftwareInstalling onto Windows XP USB/parallel interface Install the Software Page Begin installation of the scanner driver 12Begin installation of the printer driverInstalling onto Windows 98/Me/2000 USB interface Copying files for MFP driver installation 10Connect the USB interface cable. See p Windows 95/NT Windows 98/Me/2000 Page Page Power save indicator Indicators on the Operation PanelStart indicator Online indicatorOpening the printer driver from the start menu Using the Printer ModeHow to print Click the start buttonConfiguring the Option About interrupt copyingSetting up the Button Manager Using the Scanner ModeUsing the Button Manager Windows XPWindows 98/Me/2000 Scan Parameter Setting Dialog Box Flow of the Button Manager settingScanner e Event Using the Scanner key to begin scanning Press the Scanner keyPress the start key Using the Toshiba TwainOpening the scanner driver and scanning from your computer Place the original you wish to scan on the original tableScan is started Click Finish in the screen that appears Scanning with the Scanner and Camera Wizard in Windows XPSelect a name, format, and folder for the scanned image HOW to USE the Online Manual Contents of the online manualClick theto read the online manual Using Other Installed Drivers Interface cable Connecting the Interface CableConnecting the USB interface cable Parallel interface cableConnecting the parallel interface cable Appendix Specifications Model STUDIO120 DP-1210 STUDIO150 DP-1510Software Sheet paper feed unit MY-1019Auto document feeder MR-2014 System configurationOptional Equipment Part namesUsing the ADF SpecificationsStream feeding mode Misfeed in the ADFPart names Loading copy paper Side cover TrayMisfeed removal Alarm indicator Developer replacement required IndexScanning with the Scanner Software License Disclaimer of Warranty on Software Toshiba Tec Germany Imaging Systems GmbH