Toshiba 120/150 manual Scan Parameter Setting Dialog Box, Flow of the Button Manager setting

Scan Parameter Setting Dialog Box

After you have completed the Button Manager settings in Windows, configure the scan settings in Button Manager. To configure the scan settings in Button Manager, right click the ( ) icon in the Taskbar and select “Setting” from the menu that appears.

For details on configuring the scan settings in Button Manager, see the online manual or the help file.

This is the corresponding setting in the Button Manager to automatically send multiple images in full color at 75 dpi to Desktop Document Manager using the operation panel “SC1” SCANNER () key selection.

• This dialog shows the SC1 event set to go directly to Button Manager. With the Button Manager set to send the image to Desktop Document Manager. (factory default setting) Desktop Document Manager will open after acquiring the image automatically.

•The SPF shown on the dialog box means the ADF (Auto Document Feeder).

•For optimum performance when performing SC3 (Scan to FAX) it is recommended to set the Color Mode to Monochrome (no green).

Flow of the Button Manager setting

The Button Manager can directly handle a e-STUDIOxxx (where xxx is the model name of your unit) series device event and start your selected application according to the scan setting made on the e-STUDIOxxx (where xxx is the model name of your unit) operation panel (SC1, SC2, SC3, SC4, SC5, SC6).

This will scan directly into your application from the device.

Scanner e-	Event	Button	User
STUDIOxxx	Manager	Manager	selected
(where xxx is			application
the model
	Windows OS	No Selection
name of your
		dialog is	The user
unit)
		displayed.	application
SCANNER
			opens.
key pressed.

7-20INSTALL THE SOFTWARE