Misfeed removal
The copier will stop when a misfeed occurs. The misfeed ( | ) indicator blinks or | blinks in the | |
display. |
|
|
|
Open the lower side cover (under the bypass tray) and remove the misfed paper. | |||
1 If | blinks and the misfed paper is not seen from the area of the lower side cover, pull out | ||
the lower paper tray and remove the misfed paper. Then close the lower paper tray.
2 Close the lower side cover.
Close the side cover by pressing the round projections near the side cover open button. The | |||
3 misfeed ( | ) indicator will go out and the start ( | ) key will light up. | |
Specifications |
| ||
|
|
| |
Copy paper size |
| A5 to A4 | |
|
|
|
|
Paper weight |
| 56 to 80 g/m2 (15 lbs. to 21 lbs.) |
|
Paper capacity |
| One paper tray with capacity for 250 sheets of 80 g/m2 (21 lb.) bond paper | |
Weight |
| Approx. 3 kg (6.6 lbs.) |
|
|
|
| |
Dimensions |
| 498 mm (W) x 395 mm (D) x 88 mm (H) | |
|
| (19.6" (W) x 15.6" (D) x 3.5" (H)) |
|
|
|
|
|
Power supply |
| Drawn from the copier |
|
|
|
|
|
As a part of our policy of continuous improvement, TOSHIBA reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.