Toshiba 120/150 manual About interrupt copying, Configuring the Option

Page 68

4 Specify the print settings including the number of copies, media type, and print quality, and then click the “Print” button to start printing.

On Windows 95/98/Me/NT 4.0, click the “OK” button to start printing.

For details on print settings, see the online manual or the help file for the printer driver.

If copying is being performed when printing is started, copying will continue. After

copying is complete, printing will be executed when the clear () key is pressed twice, the ONLINE key is pressed to switch the unit to the online state or approximately 60 seconds (auto clear time)* elapse.·

The auto clear time varies with a user program setting. See “USER PROGRAMS” (p. 4-3)

Preheat mode and auto power shut-off mode will be cancelled when printing is started.

If the paper size specified from the software application is larger than the paper size in the printer, part of the image that is not transferred to the paper may remain on the surface of the drum. In this case, the backside of the paper may become dirty. If this occurs, change to the correct size paper and print two or three pages to clean the image.

If you start a print job while a scan job is in progress, the print data will be stored in the unit’s memory. When the scan job is completed, printing will begin.

About interrupt copying

If you press the start () key to begin a copy job while a print job using the paper tray is in progress, the copy job will begin automatically after the print data in the unit’s memory is printed (interrupt copying). When this is done, the print data remaining in the computer is not sent to the unit. When the copy job ends,

press the clear () key twice, or press the ONLINE key once to change the unit to the online state (See p. 7-15), or wait until the set auto clear time (see p. 4-2) elapses. The remaining print data will be sent to the unit and printing will resume. Interrupt copying is not possible during a print job using the bypass tray.

Configuring the Option

After you complete the installation of printer drivers, you should configure the option setting on the printer drivers.

1 Select the printer driver in the Printers folder. Then click on "File" and select " Properties".

2 Click on the "Utility" tab and set the Input Tray Options.

3 Click on "OK" to save setting.

On Windows 2000 or Windows NT 4.0, the „Utility“ tab can be displayed by selecting

„Document Defaults“ (for Windows NT 4.0) or “printing Preferences” (for Windows 2000/XP) but the option setting on this tab are impossible. The option setting should be preformed according to the above procedures.

7-17

Image 68
Contents Networking Documents %## FCC regulations User safety Ozone informationMachine noise information For user in the CanadaVaroitus Page Important points when selecting an installation site Do not install your unit in areas that areProper storage for supplies Trademark acknowledgementsDo not touch the photoconductive drum green portion Store paper in the wrapper and lying flatContents Appendix Page This chapter provides basic information for using the unit IntroductionUsing the Manual Conventions used in this manualPart Names Photoconductive drum Toner cartridgeOperation Panel Loading Paper Type of paper feeding Type of media Size Weight PaperTransparency FilmProper storage Loading the Paper Tray Gently push the paper tray back into the unit Bypass Feed including special paper Open the bypass tray and extend the trayPrint face 8LOADING Paper Making Copies Copy Flow Connecting the Power Cord Power onAbout the scan head Initial settings of operation panelPower off methods Original Placement Setting a large originalSET the Copy Quantity Exposure ADJUSTMENT/PHOTO CopyingExposure adjustment Automatic exposure adjustment To select a preset copy ratio REDUCTION/ENLARGEMENT/ZOOMTo select a zoom ratio RatioSelecting the Tray Press the tray select Key10MAKING Copies Special Functions Toner Save Mode Description of Special FunctionsUser Programs Copies will appear in two steps, each with three digits Program Mode ParametersDisplaying Total Number of Copies Maintenance Toner Cartridge Replacement Or 5 times Shutter Toner seal 4MAINTENANCE Original table and the back side of the original cover Cleaning the UnitCabinet Transfer charger Troubleshooting the Unit Troubleshooting Problem Possible cause SolutionStatus Indicators Be sure to use only genuine Toshiba parts and suppliesMisfeed Removal Misfeed in the paper feed area Misfeed in the fusing areaLower the fusing unit release lever Start indicator will light up Misfeed in the transport areaDeveloper Required Maintenance RequiredWill go out and the start indicator will light up 8TROUBLESHOOTING Installing the Software Software for the Toshiba Personal MFP Series MFP driverDesktop Document Manager Button ManagerBefore Installation Hardware and Software RequirementsFlow of installation Operatingsystem Interface Reference pages for how to installDouble-click the setup icon Installing the SoftwareInstalling onto Windows XP USB/parallel interface Install the Software Page Begin installation of the scanner driver 12Begin installation of the printer driverInstalling onto Windows 98/Me/2000 USB interface Copying files for MFP driver installation 10Connect the USB interface cable. See p Windows 95/NT Windows 98/Me/2000 Page Page Indicators on the Operation Panel Start indicatorPower save indicator Online indicatorUsing the Printer Mode How to printOpening the printer driver from the start menu Click the start buttonConfiguring the Option About interrupt copyingUsing the Scanner Mode Using the Button ManagerSetting up the Button Manager Windows XPWindows 98/Me/2000 Scan Parameter Setting Dialog Box Flow of the Button Manager settingScanner e Event Using the Scanner key to begin scanning Press the Scanner keyUsing the Toshiba Twain Opening the scanner driver and scanning from your computerPress the start key Place the original you wish to scan on the original tableScan is started Click Finish in the screen that appears Scanning with the Scanner and Camera Wizard in Windows XPSelect a name, format, and folder for the scanned image HOW to USE the Online Manual Contents of the online manualClick theto read the online manual Using Other Installed Drivers Connecting the Interface Cable Connecting the USB interface cableInterface cable Parallel interface cableConnecting the parallel interface cable Appendix Specifications Model STUDIO120 DP-1210 STUDIO150 DP-1510Software Sheet paper feed unit MY-1019System configuration Optional EquipmentAuto document feeder MR-2014 Part namesUsing the ADF SpecificationsStream feeding mode Misfeed in the ADFPart names Loading copy paper Side cover TrayMisfeed removal Alarm indicator Developer replacement required IndexScanning with the Scanner Software License Disclaimer of Warranty on Software Toshiba Tec Germany Imaging Systems GmbH