Toshiba (T)XM6401B/F1 instruction manual This equipment complies with the following standards

CERTIFICATION

	This equipment complies with the following standards:
	XM-6401B		TXM6401F1
	UL 1950 Electrical Business Equipment	UL 1950 Electrical Business Equipment
	CAN/CSA: TD STD 950/UL 1950	CSA Standard C22.2 No. 234
	TUV EN 60950/08.92, A1/01.93,A2/08.93
	60929/09/.91	N/A
	FCC Class B - specificationlimitsdefinedby	FCC Class B - specification limits defined
	EN55022forinformationTechnologyEquip.	byEN55022forinformationTechnologyEquip.
	IEC Standard: IEC 801-2: 1992
	IEC 801-3: 1994, ENV 50140 1994	N/A
	IEL 801-4: 1988
	European:
	Directives: 89/336/EEC (EMC directives)
	Harmonized Standard: EN 500821-1: 1992	N/A
	EN55022: 1992 class B
FCCDECLARATIONOFCONFORMITY
	CD-External Enclosure:		TXM6401F1
	Certification Date:	11/9/98

Toshiba America Electronic Components, Inc. - SDD

35 Hammond, Irvine, CA 92618

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Re-orient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

This equipment has been certified to comply with the limits for a class B computing device, pursuant to FCC Rules. In order to maintain compliance with FCC regulations, shielded cables must be used with this equipment. Operation with non-approved equipment or unshielded cables is likely to result in interference to radio and TV reception. The user is cautioned that changes and modifications made to the equipment without the approval of the manufacturer could void the user's authority to operate this equipment.

iiTOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive