CABLING
SCSI - The internal SCSI interface cable is connected to your SCSI host adapter card and fits into the socket on the back of your CD- ROM. The stripe side (or red-colored side) of the ribbon cable con- nects to pin 1 on the drive’s SCSI connector which is found next to the drive’s power connector. Carefully push the SCSI connector into the socket, making sure it fits snugly.
Attaching SCSI Cable
Power - Apply power to your CD-ROM by connecting your computer’s +12V/+5V power cable to the power socket at the back of the drive. One side of the plug has chamfered edges, so the power connector fits only one way. Push plug completely into the socket making sure the plug fits into the socket correctly.
CAUTION!
Severe damage to the CD-ROM circuits may occur if power cable is plugged in upside-down with power ON.
Installing Power Cable
8TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive
