SCSI DRIVES
The XM-6401B is a SCSI-2 (Small Computer Systems Inter- face) device. Some other SCSI devices you may already have connected to your computer are scanners, tape drives, or an-
other CD-ROM drive.
PC SYSTEMS: To add a SCSI device to your computer, you must have a SCSI interface card already in place. The interface card fits into one of the slots inside your computer and connects to your CD-ROM device via a SCSI cable.
Your CD-ROM also requires a software driver to be installed. This driver is written for the SCSI interface card you are using. If you do not have the CD software driver, contact your SCSI card manufac- turer (do not contact Toshiba).
APPLE MACINTOSH SYSTEMS: If you are connecting the XM- 6401B CD-ROM to an Apple Macintosh system, there is no need to install an interface card, as Apple systems have a built-in SCSI port. You will need a CD-ROM software driver written for the Macintosh that supports Toshiba CD-ROMs. (Toshiba recommends CD-ROM Tool Kit by FWB Inc.)*
*CD-ROM Tool Kit can be purchased from Advanced Multimedia Concepts (AMC), 888-262-9700.
2TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive