[Product] Group
[Printer Serial No.]:
The serial number specific to the printer is displayed.
This setting cannot be changed.
[SHELL]:
The status of the SHELL function is displayed. This setting cannot be changed.
[Sensor] Group
[Reflective Sensor Threshold Select]:
Select how to set the threshold for the reflective sensor.
Default | Command Set |
Options | Manual Set, Command Set |
[Reflective Sensor Threshold]:
Set a fine adjustment value for threshold to the reflective sensor output in units of 0.1 V.
Default | 1.0 V |
Range | 0.1 to 4.0 V |
[Transmissive Sensor Threshold Select]:
Select how to set the threshold for the transmissive sensor.
Default | Command Set |
Options | Manual Set, Command Set |
[Transmissive Sensor Threshold]:
Set a fine adjustment value for threshold to the transmissive sensor output in units of 0.1 V.
Default | 1.4 V |
Range | 0.1 to 4.0 V |
[Ribbon Adjustment] Group [Drive Voltage
Fine adjust the ribbon
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default | 0 |
Range |
[Drive Voltage (Feed)]:
Fine adjust the ribbon feed motor voltage (torque).
The fine adjustment value set by the Ribbon Motor Drive Voltage Fine Adjust command [RM] is displayed in the left box.
When the parameter is not retrieved, the value in the left box becomes zero (0).
Default | 0 |
Range |
[RTC] Group [Date Time]:
The current date and time programmed for the RTC module are displayed. This setting cannot be changed.
[Battery Check]:
Select whether to enable or disable the battery check function.
Default | Disable |
Options | Disable, Enable |
[Renewal]:
Select the timing when the date and time are updated during printing.
Default | Batch |
Options | Batch, Page |
41