[BASIC File Storage Area]
Set the area size for storing the BASIC program.
When "No Change" is selected, existing data is retained without allocating the BASIC file storage area. Set 512KB (4 blocks) or more.
Default | 512 KB |
Options | No Change, 0 to 3072 KB (in units of 128KB) |
[PC Save Storage Area]
The storage area size for printer commands is displayed.
After the memory is allocated to the above three, the rest of the memory is automatically allocated to the PC Save storage area.
It is required to adjust the storage area size for True type fonts, bitmap external characters and BASIC files so that the PC Save storage area size does not become a negative value.
When "No Change" is selected for the [BASIC File Storage Area], no memory size is displayed.
[BASIC Main Program]
Select whether or not to download the BASIC main program. The checkbox has not been checked as default.
When checked, the starting block and the program file can be selected.
The specified file is downloaded to the specified block of the printer memory.
Starting block
Specify the area where the program is stored.
Set a value so that the area does not overlap the other blocks.
Default | 0 |
Range | 0 to 23 |
Program file
Click the 
button to open the file selection screen. Select a BASIC main program, click [Open], then the full path of the file is displayed.
The [BASIC Main Program] does not become effective unless a file is selected. When reading a file or creating download data failed, the error message is displayed.
[BASIC System Mode Program]
Select whether or not to download the BASIC system mode program. The checkbox has not been checked as default.
When checked, the starting block and the program file can be selected.
The specified file is downloaded to the specified block of the printer memory.
Starting block
Specify the area where the program is stored.
Set a value so that the area does not overlap the other blocks.
Default | 1 |
Range | 0 to 23 |
Program file
Click the 
button to open the file selection screen. Select a BASIC system mode program, click [Open], then the full path of the file is displayed.
The [BASIC System Mode Program] does not become effective unless a file is selected. When reading a file or creating download data failed, the error message is displayed.
[BASIC Data File]
Select whether or not to download the BASIC data file. The checkbox has not been checked as default.
When checked, the start block and data file setting become editable.
The specified file is downloaded to the specified block of the printer memory.
Starting block
Specify the area where the program is stored.
Set a value so that the area does not overlap the other blocks.
Default | 2 |
Range | 0 to 23 |
67