Operational Conditions
The Product can be used under the following system and environmental requirements.
Software (Operation System)
English operation systems of:
Windows XP (Service Pack 3 or later), Windows Vista, Windows 7
Note:
Hardware
A DOS/V (IBM AT compatible) machine must be used under the above Windows operation system and recommended conditions explained in the table below.
| Recommended Conditions |
CPU | Intel® Pentium® 4 1.5 GHz or higher |
Memory | 256 MB or more |
HDD | Free space of 1 GB or more |
Display size | 1024 x 768 pixels or more |
Interface
Connections are made through the following interface. Parallel
Serial
USB Wired LAN
Wireless LAN
When the parallel or serial interface is used, please assign the installed printer driver port to a port other than the selected port.
Please note that some functions are disabled by using the parallel interface.
When USB is used, Plug and Play requests printer driver installation. The Product does not need any printer driver. However, printer driver installation is requested in every connection. If you use the Product frequently, it is recommended to install a printer driver. For information about printer driver installation, please refer to our web site.
When wired LAN or wireless LAN is used, it is possible to collectively send files to multiple printers connected to the network.
Before executing any processing, please confirm there is no access to the printer from the other tools. If unrelated data is sent to the printer while the processing is executed, an error may occur.
Disclaimer
The Product allows the Administrator/User to monitor printer statuses, check/change printer setting, and download a setting file on the computer monitor for the Supported Printers. When an invalid setting is made for the Supported Printers using the Product, they may malfunction and may not be used afterwards.
The Product is intended to be used by the Administrator who is familiar with the Supported Printers. The Setting Tool and Downloader must be used by the Administrator or under instructions of the Administrator.
TOSHIBA TEC shall not be liable for any outcome resulted from a failure to follow the above instructions (both the Product and the Supported Printers).
4