Auto

[Q Value]:

Set the sensitivity for detecting RFID tags.

Default	0
Range	0 to 15

[AGC Threshold]:

Set the threshold value used to determine an RFID tag is defective or not.

Default	0
Range	0 to 15

[Write AGC Threshold]:

Set the threshold value used to determine whether or not to write data to RFID tags.

Default	0
Range	0 to 15

[Write Retry Min. AGC]:

Set the lower limit value used to determine whether or not to retry a data write.

Default	0
Range	0 to 15

[RF Channel]:

Set a channel used for data write.

Default	AUTO
Options	AUTO, 2 CH, 3 CH, 4 CH, 5 CH, 6 CH, 7 CH, 8 CH

[Multi-word Write]:

Select whether or not to enable the multi-word write function for Gen2-compatible Hibiki tag. When this function is used, the data write efficiency is increased.

Default	Disable
Options	Disable, Enable

[Retry] Group

[Retry Position Adjustment]:

Set the amount the printer feeds the RFID label forward or backward to retry a data write.

Default	0 mm
Range	-99 to 99 mm

[Issue Retry Labels]:

Set the number of RFID labels to be issued for retry.

Default	3 labels
Range	0 to 255 labels

[Read Retry Count]:

Set the max. number of times reading one RFID tag is retried.

Default	5 times
Range	0 to 255 times

[Read Retry Timeout]:

Set the timeout value for retry to read one RFID tag.

Default	4.0 sec
Range	0.0 to 9.9 sec

[Write Retry Count]:

Set the number of times writing data to one RFID tag is retried.

Default	5 times
Range	0 to 255 times

[Write Retry Timeout]:

Set the timeout value for retry to write data to one RFID tag.

Default	2.0 sec
Range	0.0 to 9.9 sec