Create External Character Tab
[Specification Method]
How to specify the bitmap file path is selectable.
Select the "File" when an external character is created from one bitmap file.
Select the "Folder" when an external character is created from more than one bitmap file.
Default | File |
Options | File, Folder |
[Location]
Select the type of memory where the files are stored.
Default | Onboard Flash Memory |
Options | Onboard Flash Memory, USB Memory |
[Bitmap Path]
Specify the location where the bitmap file is stored.
Click the 
button to show the full path of the specified location.
Only monochrome (black and white) bitmaps are acceptable. One dot of a bitmap is equivalent to one pixel specified in Paint.
When the "File" is selected for the [Specification Method], specify one bitmap file from the screen. If the selected file is not a monochrome bitmap, the error message is displayed.
If the selected file exceeds the acceptable upper limit of the width or height, the error message is displayed. When the "Folder" is selected for the [Specification Method], specify a folder in which more than one bitmap file is stored. The bitmap files in the specified folder are displayed in the [Bitmap List] as long as their file names conform to the format described below.
72