Toshiba B-EX operation manual Auto

General (2) Tab

Setup group	Setup item	Options or range	Default
Position	Feed	-50.0 to +50.0 (mm)	0.0
Adjustment	Cut/Peef Off	-50.0 to +50.0 (mm)	0.0
	Back Feed	-9.9 to +9.9 (mm)	0.0
	X-coordinate	-99.5 to +99.5 (mm)	0.0
Tone Adjustment	Thermal Transfer	-20 to +10	0
	Direct Thermal	-20 to +10	0
Command	Control Code	AUTO	AUTO
		[ESC] [LF] [NUL]
		{ }
		Manual
	Code 1	00～FF	1B
	Code 2	00～FF	0A
	Code 3	00～FF	00
BASIC	Basic Interpreter	Disable	Disable
		Enable
	Basic Trace	Disable	Disable
		Enable
Product	Printer Serial No.	Displayed only when obtained.	Blank
	SHELL	Disable	Disable
Sensor	Reflective Sensor Threshold Select	Manual Set	Command Set
Adjustment		Command Set
	Reflective Sensor Threshold	0.1 to 4.0 (V)	1.0
	Transmissive Sensor Threshold	Manual Set	Command Set
	Select	Command Set
	Transmissive Sensor Threshold	0.1 to4.0 (V)	1.4
Ribbon	Drive Voltage (Take-up)	-15 to 10	0
Adjustment	Drive Voltage (Feed)	-15 to 10	0
RTC	Date Time	Displayed only when obtained.	Blank
	Battery Check	Disable	Disable
		Enable
	Renewal	Batch	Batch
		Page
Password	System Mode Password	Disable	Disable
		Enable
	New Password	0000 to FFFF	0000
	Old Password	0000 to FFFF	0000

85