Using Support Tools
3.When the DELL™ logo appears, press <F12> immediately. Select Diagnostics from the boot menu and press <Enter>.
NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again.
NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell Diagnostics from the Drivers and Utilities media.
4.Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive.
Starting Dell Diagnostics From the Drivers and Utilities Media
1.Insert the Drivers and Utilities media.
2.Shut down and restart the computer. When the DELL logo appears, press <F12> immediately.
42
NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft® Windows® desktop; then, shut down your computer and try again.
NOTE: The next steps change the boot sequence for one time only. On the next
3.When the boot device list appears, highlight
4.Select the Boot from
5.Type 1 to start the CD menu and press <Enter> to proceed.
6.Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer.
7.When the Dell Diagnostics Main Menu appears, select the test you want to run.