AMT Datasouth 5106 manual Overall Dimensions, Ribbon Specifications

Page 10

1.25106 Overall Dimensions

∙Length: 17.3 inches/440 millimeters

∙Extended Rewind: (On center from front) 4.2 inches/107 millimeters

∙Height: 12.6 inches/320 millimeters

∙Width: 10.7 inches/273 millimeters

Figure 1. Overall Dimensions

1.3Ribbon Specifications

∙Length: 984 feet/300 meters

∙Ribbon Leader (Clear): 12 inches/300 millimeters

∙Ribbon Trailer (Mirror coating): 6 inches/150 millimeters

∙Ink Side: Outside

Figure 2. Ribbon Dimensions

2

Image 10

Contents CodeWriter Technical Reference AMT Datasouth Corp AMT Datasouth CodeWriter 5106 Disclaimer of Warranties Copyright Notice Page Page Table of Figures Page Features General Information5106 Overall Dimensions Ribbon SpecificationsAssembly and Setup Procedure Initial SetupSelection of Media Output Mode Parameter Setting Mode MODE/MENUParameter Tree Version Loading INK Ribbon and Label Roll ∙ If outside winding label roll is used Adjustments Thermal Head ReplacementChanging the Direction of the Take-up Roller Thermal Head Positioning Thermal Head BlockMechanical Adjustments to the Thermal Head Mechanical AdjustmentPage Page Page Page Page Ribbon Adjustment RibbonPage Running Condition Wrinkle On RibbonPage Sensors Sensor Type and FunctionsSensitivity Adjustment Name Electrical Circuitry External Connector and PIN Assignments Voltage Check and Adjustment Usage and Adjusted ByVoltage Adjusted By Main PCB BoardTAKE-UP Motor Connectors