Reference Manual for the RangeMax 240 Wireless Router WPNT834
a.To allow access from any IP address on the Internet, select Everyone.
b.To allow access from a range of IP addresses on the Internet, select IP address range. Enter a beginning and ending IP address to define the allowed range.
c.To allow access from a single IP address on the Internet, select Only this computer. Enter the IP address that will be allowed access.
3.Specify the Port Number for accessing the management interface.
Web browser access normally uses the standard HTTP service port 80. For greater security, enter a custom port number for the remote management Web interface. Choose a number between 1024 and 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP.
4.Click Apply to have your changes take effect.
Note: When accessing your router from the Internet, type your router's WAN IP address 
into your browser's Address (in Internet Explorer) or Location (in Netscape) box, followed by a colon (:) and the custom port number. For example, if your external
address is 134.177.0.123 and you use port number 8080, then enter http:// 134.177.0.123:8080 in your browser.
Advanced Configuration of the Router |