NETGEAR WPNT834 manual Connection Status Items

Page 64

 

 

Reference Manual for the RangeMax 240 Wireless Router WPNT834

 

 

 

 

Table 6-1.

Wireless Router Status Fields

 

 

 

 

 

Field

 

 

Description

 

 

 

 

 

 

Wireless Port

 

 

These parameters apply to the Wireless port of the router.

 

Name (SSID)

 

 

This field displays the wireless network name (SSID) being used by the

 

 

 

 

wireless port of the router. The default is NETGEAR.

 

Region

 

 

This field displays the geographic region where the router being used. It

 

 

 

 

may be illegal to use the wireless features of the router in some parts of

 

 

 

 

the world.

 

Channel

 

 

Identifies the channel of the wireless port being used. See “Wireless

 

 

 

 

Communications” in Appendix B for the frequencies used on each

 

 

 

 

channel.

 

 

 

 

 

 

Mode

 

 

Indicates the router communication mode: 802.11g and 802.11b,

 

 

 

 

802.11g only, 802.11b only, Up To 126 Mbps, or Up To 240 Mbps.

 

 

 

 

 

 

Wireless AP

 

 

Indicates if the Router Radio feature of the Router is enabled. If not

 

 

 

 

enabled, the Wireless LED on the front panel will be off.

 

 

 

 

 

Broadcast Name

 

Indicates if the router is broadcasting its SSID

 

 

 

 

 

 

Click on the Connection Status button to display the connection status, as shown below.

Figure 6-2

This screen shows the following statistics:.

Table 6-2:

Connection Status Items

 

 

 

Item

 

Description

 

 

 

IP Address

 

The WAN (Internet) IP Address assigned to the router.

 

 

 

Subnet Mask

 

The WAN (Internet) Subnet Mask assigned to the router.

 

 

 

 

 

 

Maintenance

6-3

v1.0, November 2005

Image 64
Contents NETGEAR, Inc Trademarks Statement of ConditionsEN 55 022 Declaration of Conformance Bestätigung des Herstellers/ImporteursCertificate of the Manufacturer/Importer Voluntary Control Council for Interference Vcci StatementCustomer Support World Wide WebV1.0, November Contents Chapter Wireless Configuration Chapter Troubleshooting Viii Audience, Scope, Conventions, and Formats Chapter About This ManualTypographical Conventions How to Print this Manual How to Use This ManualManual Scope Printing the Full Manual V1.0, November Key Features Chapter Introduction802.11g Wireless Networking RangeMax Multi-In, Multi-Out Mimo TechnologyPowerful, True Firewall with Content Filtering SecurityAutosensing Ethernet Connections with Auto Uplink Extensive Protocol SupportEasy Installation and Management Maintenance and SupportPackage Contents Netgear Related ProductsRouter’s Front Panel Status Light DescriptionsRouter’s Rear Panel Road Map for ‘How to Get There From Here’ Road Map for How to Get There From HereConnection A Road Map for How to Get There From Here Printers in aV1.0, November Chapter Connecting the Router to the Internet Prepare to Install Your Wireless RouterFirst, Use the Smart Wizard to Configure the Wireless Router Now, Set Up a Computer for Wireless Connectivity Troubleshooting Tips Overview of How to Access the Wireless Router Ways to access the routerV1.0, November V1.0, November How to Bypass the Configuration Assistant How to Manually Configure Your Internet Connection ISP Does Not Require LoginV1.0, November V1.0, November Using the Smart Setup Wizard Netgear Product Registration, Support, and Documentation V1.0, November Chapter Wireless Configuration Observing Performance, Placement, and Range GuidelinesImplementing Appropriate Wireless Security Understanding Wireless Settings V1.0, November Basic Wireless Security Options WEPV1.0, November If WPA-PSK or WPA2-PSK Authentication is Used Default Factory Settings How to Set Up and Test Basic Wireless ConnectivityV1.0, November How to Configure WEP V1.0, November How to Configure WPA-PSK or WPA2-PSK Wireless Security How to Restrict Wireless Access by MAC Address Click the Turn Access Control On check boxV1.0, November V1.0, November Chapter Content Filtering Content Filtering OverviewBlocking Access to Internet Sites Blocking Access to Internet Services Configuring a User Defined Service Scheduling When Blocking Will Be Enforced Blocking Services by IP Address RangeViewing Logs of Web Access or Attempted Web Access Log entry descriptionsConfiguring E-Mail Alert and Web Access Log Notifications Log action buttonsV1.0, November Chapter Maintenance Viewing Wireless Router Status InformationWireless Router Status Fields This screen shows the following parametersWireless port of the router. The default is Netgear Region Connection Status ItemsRouter Statistics Items Configuration File Management Viewing a List of Attached DevicesBacking Up and Restoring the Configuration Erasing the ConfigurationUpgrading the Router Software V1.0, November Changing the Administrator Password V1.0, November Power Light Not On Chapter TroubleshootingBasic Functioning Lights Never Turn Off LAN or WAN Port Lights Not OnTroubleshooting the Web Configuration Interface Troubleshooting the ISP Connection Troubleshooting a TCP/IP Network Using a Ping Utility Testing the LAN Path to Your RouterTesting the Path from Your Computer to a Remote Device Restoring the Default Configuration and Password Problems with Date and Time Advanced Configuration of the Router Configuring Advanced Wireless SettingsV1.0, November Wireless Card Access List Wireless Card Access Setup Configuring Port Triggering and Port Forwarding V1.0, November Click Add Service Configuring Port Forwarding to Local Servers Adding a Custom Service Click the Add Custom Service buttonLocal Web and FTP Server Example Editing or Deleting a Port Forwarding EntryMultiple Computers for Internet Gaming Configuring the WAN Setup Options Connecting Automatically, as RequiredDisabling the SPI Firewall Setting Up a Default DMZ ServerResponding to a Ping on the Internet WAN Port Using the LAN IP Setup Options Setting the MTU SizeConfiguring LAN TCP/IP Setup Parameters Using the Router as a Dhcp server Using Address ReservationUsing a Dynamic DNS Service Select the Use a Dynamic DNS Service check box Configuring Static Routes V1.0, November Enabling Remote Management Access Select the Turn Remote Management On check boxV1.0, November Using Universal Plug and Play UPnP V1.0, November V1.0, November Appendix a Technical Specifications Power AdapterPSK Appendix B Related Documents Document LinkV1.0, November
Related manuals
Manual 6 pages 35.94 Kb