Reference Manual for the RangeMax 240 Wireless Router WPNT834
Default Factory Settings
When you first receive your WPNT834, the default factory settings are in effect, as shown below. You can restore these defaults with the Factory Default Restore button on the rear panel. After you install the WPNT834 router, use the procedures below to customize any of the settings to better meet your networking needs.
FEATURE | DEFAULT FACTORY SETTINGS |
|
|
Wireless Router Radio | Enabled |
|
|
Wireless Access List (MAC Filtering) | All wireless stations allowed |
|
|
SSID broadcast | Enabled |
|
|
SSID | NETGEAR |
|
|
802.11b/g RF Channel | 11 |
|
|
Mode | Auto 108 |
|
|
Authentication Type | Automatic |
|
|
WEP | Disabled |
|
|
DHCP Server | Enabled |
|
|
DHCP range | 192.168.1.2 to 192.168.1.254 |
|
|
How to Set Up and Test Basic Wireless Connectivity
Note: If you use a wireless computer to configure WPA settings, you will be disconnected 
when you click Apply. Reconfigure your wireless adapter to match the new
settings or access the wireless router from a wired computer to make any further changes.
Follow the instructions below to set up and test basic wireless connectivity. Once you have established basic wireless connectivity, you can enable security settings appropriate to your needs.
1.Log in to the WPNT834 firewall at its default LAN address of http://www.routerlogin.net (or http://192.168.1.1) with its default user name of admin and default password of password, or using whatever LAN address and password you have set up.
Wireless Configuration |