NETGEAR WPNT834 manual Powerful, True Firewall with Content Filtering, Security

Page 15

Reference Manual for the RangeMax 240 Wireless Router WPNT834

WPA-PSK support. Support for Wi-Fi Protected Access (WPA) data encryption which provides strong data encryption and authentication based on a pre-shared key.

Wireless access can be restricted by MAC address.

Wireless network name broadcast can be turned off so that only devices that have the network name (SSID) can connect.

A Powerful, True Firewall with Content Filtering

Unlike simple Internet sharing NAT routers, the WPNT834 is a true firewall, using stateful packet inspection to defend against hacker attacks. Its firewall features include:

Denial of Service (DoS) protection.

Automatically detects and thwarts DoS attacks such as Ping of Death, SYN Flood, LAND Attack, and IP Spoofing.

Blocks unwanted traffic from the Internet to your LAN.

Blocks access from your LAN to Internet locations or services that you specify as off-limits.

Logs security incidents.

The WPNT834 will log security events such as blocked incoming traffic, port scans, attacks, and administrator logins. You can configure the router to E-mail the log to you at specified intervals. You can also configure the router to send immediate alert messages to your E-mail address or E-mail pager whenever a significant event occurs.

Keyword screening.

The WPNT834 prevents objectionable content from reaching your computers. The router allows you to control access to Internet content by screening for keywords within Web addresses. You can configure the router to log and report attempts to access objectionable Internet sites.

Security

The WPNT834 router is equipped with several features designed to maintain security, as described in this section.

Computers Hidden by NAT.

NAT opens a temporary path to the Internet for requests originating from the local network. Requests originating from outside the LAN are discarded, preventing users outside the LAN from finding and directly accessing the computers on the LAN.

Introduction

2-3

v1.0, November 2005

Image 15
Contents NETGEAR, Inc Bestätigung des Herstellers/Importeurs TrademarksStatement of Conditions EN 55 022 Declaration of ConformanceWorld Wide Web Certificate of the Manufacturer/ImporterVoluntary Control Council for Interference Vcci Statement Customer SupportV1.0, November Contents Chapter Wireless Configuration Chapter Troubleshooting Viii Chapter About This Manual Audience, Scope, Conventions, and FormatsTypographical Conventions How to Use This Manual How to Print this ManualManual Scope Printing the Full Manual V1.0, November Chapter Introduction Key FeaturesRangeMax Multi-In, Multi-Out Mimo Technology 802.11g Wireless NetworkingSecurity Powerful, True Firewall with Content FilteringExtensive Protocol Support Autosensing Ethernet Connections with Auto UplinkMaintenance and Support Easy Installation and ManagementNetgear Related Products Package ContentsStatus Light Descriptions Router’s Front PanelRouter’s Rear Panel Road Map for How to Get There From Here Road Map for ‘How to Get There From Here’Connection Printers in a A Road Map for How to Get There From HereV1.0, November Prepare to Install Your Wireless Router Chapter Connecting the Router to the InternetFirst, Use the Smart Wizard to Configure the Wireless Router Now, Set Up a Computer for Wireless Connectivity Troubleshooting Tips Ways to access the router Overview of How to Access the Wireless RouterV1.0, November V1.0, November How to Bypass the Configuration Assistant ISP Does Not Require Login How to Manually Configure Your Internet ConnectionV1.0, November V1.0, November Using the Smart Setup Wizard Netgear Product Registration, Support, and Documentation V1.0, November Observing Performance, Placement, and Range Guidelines Chapter Wireless ConfigurationImplementing Appropriate Wireless Security Understanding Wireless Settings V1.0, November WEP Basic Wireless Security OptionsV1.0, November If WPA-PSK or WPA2-PSK Authentication is Used How to Set Up and Test Basic Wireless Connectivity Default Factory SettingsV1.0, November How to Configure WEP V1.0, November How to Configure WPA-PSK or WPA2-PSK Wireless Security Click the Turn Access Control On check box How to Restrict Wireless Access by MAC AddressV1.0, November V1.0, November Content Filtering Overview Chapter Content FilteringBlocking Access to Internet Sites Blocking Access to Internet Services Configuring a User Defined Service Blocking Services by IP Address Range Scheduling When Blocking Will Be EnforcedLog entry descriptions Viewing Logs of Web Access or Attempted Web AccessLog action buttons Configuring E-Mail Alert and Web Access Log NotificationsV1.0, November Viewing Wireless Router Status Information Chapter MaintenanceThis screen shows the following parameters Wireless Router Status FieldsConnection Status Items Wireless port of the router. The default is Netgear RegionRouter Statistics Items Viewing a List of Attached Devices Configuration File ManagementErasing the Configuration Backing Up and Restoring the ConfigurationUpgrading the Router Software V1.0, November Changing the Administrator Password V1.0, November Chapter Troubleshooting Power Light Not OnBasic Functioning LAN or WAN Port Lights Not On Lights Never Turn OffTroubleshooting the Web Configuration Interface Troubleshooting the ISP Connection Testing the LAN Path to Your Router Troubleshooting a TCP/IP Network Using a Ping UtilityTesting the Path from Your Computer to a Remote Device Restoring the Default Configuration and Password Problems with Date and Time Configuring Advanced Wireless Settings Advanced Configuration of the RouterV1.0, November Wireless Card Access List Wireless Card Access Setup Configuring Port Triggering and Port Forwarding V1.0, November Click Add Service Configuring Port Forwarding to Local Servers Click the Add Custom Service button Adding a Custom ServiceEditing or Deleting a Port Forwarding Entry Local Web and FTP Server ExampleMultiple Computers for Internet Gaming Connecting Automatically, as Required Configuring the WAN Setup OptionsSetting Up a Default DMZ Server Disabling the SPI FirewallResponding to a Ping on the Internet WAN Port Setting the MTU Size Using the LAN IP Setup OptionsConfiguring LAN TCP/IP Setup Parameters Using Address Reservation Using the Router as a Dhcp serverUsing a Dynamic DNS Service Select the Use a Dynamic DNS Service check box Configuring Static Routes V1.0, November Select the Turn Remote Management On check box Enabling Remote Management AccessV1.0, November Using Universal Plug and Play UPnP V1.0, November V1.0, November Power Adapter Appendix a Technical SpecificationsPSK Document Link Appendix B Related DocumentsV1.0, November
Related manuals
Manual 6 pages 35.94 Kb