NETGEAR WNDR3700V4 user manual  To go to the Attached Devices screen

Page 24

N600 Wireless Dual Band Gigabit Router WNDR3700v4

•Use These DNS Servers. If you know that your ISP requires specific servers, select this option. Enter the IP address of your ISP’s primary DNS server. If a secondary DNS server address is available, enter it also.

Router MAC Address. The Ethernet MAC address that the router uses on the Internet port. Some ISPs register the MAC address of the network interface card in your computer when your account is first opened. They accept traffic only from the MAC address of that computer. This feature allows your router to use your computer’s MAC address (this is also called cloning).

•Use Default Address. Use the default MAC address.

•Use Computer MAC Address. The router captures and uses the MAC address of the computer that you are now using. You have to use the one computer that the ISP allows.

•Use This MAC Address. Enter the MAC address that you want to use.

Attached Devices

The Attached Device screen shows all computers or devices that are currently connected to your network.

To go to the Attached Devices screen:

From the Basic Home screen, select Attached Devices.

Wired devices are connected to the router with Ethernet cables. Wireless devices have joined the wireless network.

•# (number). The order in which the device joined the network.

•IP Address. The IP address that the router assigned to this device when it joined the network. This number can change if a device is disconnected and rejoins the network.

•MAC Address. The unique MAC address for each device does not change. The MAC address is typically shown on the product label.

•Device Name. If the device name is known, it is shown here.

You can click Refresh to update this screen.

NETGEAR genie Basic Settings

24

Image 24

Contents N600 Wireless Dual Band Gigabit Router WNDR3700v4 October 2013 East Plumeria Drive San Jose, CASupport Contents Netgear genie Advanced Home Advanced Settings Appendix a Supplemental Information Hardware Setup Getting to know your routerHardware Features Unpack Your RouterFront Panel Icon Description Back Panel LabelAttach the Stand Position Your RouterCable Your Router Verify the Cabling N600 Wireless Dual Band Gigabit Router WNDR3700v4 Connecting the router Getting Started with Netgear GenieRouter Setup Preparation Types of Logins and AccessWireless Devices and Security Settings Use Standard TCP/IP Properties for DhcpUse Netgear genie after Installation Upgrade the FirmwareDashboard Basic Home Screen Basic Home screen with dashboard, language, and online helpJoin Your Wireless Network Wi-Fi Protected Setup WPS Method To use WPS to join the wireless network Manual MethodNetgear genie App and Mobile genie App Netgear genie Basic Settings Your Internet connection and networkInternet Setup  To view or change the basic Internet setupBasic Home Screen Internet Setup Screen Fields Does Your ISP Require a Login? Answer either yes or noInternet IP Address Attached Devices  To go to the Attached Devices screen To set up Live Parental Controls Parental ControlsN600 Wireless Dual Band Gigabit Router WNDR3700v4 ReadySHARE Storage Click the Take me to the status screen buttonBasic Wireless Settings  To view or change basic wireless settingsWireless Settings Screen Fields Wireless Network 2.4 GHz b/g/n and 5 GHzRegion Selection Change WPA Security Option and Password Security Options Settings To change the WPA settings  To set up a guest network Select Basic Guest Network Guest NetworksGuest Network Wireless Security Options WPA EncryptionSpecify custom settings Netgear genie Advanced HomeSetup Wizard  To use the Setup WizardNetgear genie Advanced Home Screen WPS Wizard  To use the WPS Wizard Select Advanced WPS WizardSelect either Push Button or PIN Number Setup Menu WAN Setup Default DMZ Server  To set up a default DMZ serverChange the MTU Size Common MTU sizesLAN Setup  To change the MTU size Select Advanced Setup WAN Setup To change the LAN settings LAN Setup Screen Settings LAN TCP/IP SetupUse Router as a Dhcp Server Use the Router as a Dhcp Server Address ReservationAddress Reservation Quality of Service QoS Setup Enable WMM QoS for Wireless Multimedia Applications To configure QoS  To reserve an IP addressSet Up QoS for Internet Access QoS for Applications and Online Gaming To create a QoS policy for applications and online games Select the Turn Internet Access QoS On check box QoS for a Router LAN PortClick the Add Priority Rule button  To edit or delete a QoS policy Select Advanced QoS Setup QoS for a MAC AddressEdit or Delete an Existing QoS Policy Click Add Priority RuleAccessing and configuring a USB storage StorageReadySHARE Access  To access the USB device from WindowsFile-Sharing Scenarios Share PhotosStore Files in a Central Location for Printing Share Large Files over the Internet To share files with your friends and family Storage Basic Settings  To go to Storage Basic Settings Select Basic ReadySHARE To access your USB device Add or Edit a Network Folder Select Basic ReadySHARE, and click EditStorage Advanced Settings  To go to USB Storage Advanced SettingsSafely Remove a USB Drive Media ServerAvailable Network Folders Specify Approved USB Devices Select the Allow only approved devices check boxAccess the Router USB Drive Remotely Using FTP  To connect to the router’s USB drive using a web browserConnect to the USB Drive from a Remote Computer Ftp//10.1.65.4Keep unwanted content out of your network SecurityKeyword Blocking of Http Traffic Select Advanced Security Block Sites To delete a keyword or domain  To specify a trusted computerBlock Services Port Filtering  To block services Select Advanced Security Block ServicesN600 Wireless Dual Band Gigabit Router WNDR3700v4 Schedule Blocking  To schedule blockingSecurity Event Email Notifications Administration Manage your network To check for new firmware and update your router View Router Status Router InformationHardware Version. The router model LAN PortInternet Port Show Statistics ButtonConnection Status Button View connection status informationWireless Settings 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access Manage the Configuration File Back Up SettingsRestore Configuration Settings EraseSet Password Password RecoveryAdvanced Settings Customize your networkAdvanced Wireless Settings Restrict Wireless Access by MAC Address  To restrict access based on MAC addressesWireless AP Select the Turn Access Control On check boxWireless Repeating Function WDS Select the Enable Access Point Mode check boxWireless repeating scenario  To view or change the Wireless Repeating Function settings Following settings are availableSet Up the Base Station  To set up the base stationSet Up a Repeater Unit  To configure the router as a repeater unitRemote Computer Access Basics Port Forwarding and Port TriggeringPort Triggering to Open Incoming Ports Destination port numberPort Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers  To set up port forwardingAdd a Custom Service Edit or Delete a Port Forwarding Entry To edit or delete a port forwarding entry Set Up Port Triggering Click Edit Service or Delete ServiceApplication Example Making a Local Web Server Public  To make a local web server publicN600 Wireless Dual Band Gigabit Router WNDR3700v4  To set up Dynamic DNS Select the Use a Dynamic DNS Service check boxDynamic DNS Static Routes  To set up a static route Remote Management USB Settings Universal Plug and Play To turn on Universal Plug and Play  To set up an IPv6 Internet connection type IPv6IPv6 LAN Setup Auto Detect FieldsIPv6 Filtering Auto Config 6to4 Tunnel Pass ThroughIPv6 Fixed WAN Setup IPb6 Fixed LAN SetupFixed Dhcp PPPoE Traffic Meter Troubleshooting Quick Tips Power LED Is Off or Blinking Troubleshoot with the LEDsLEDs Never Turn Off Wireless 2.4 GHz and 5 GHz LEDs Are Off Cannot Log In to the RouterInternet LED Is Off Cannot Access the Internet Wireless Connectivity Changes Not SavedIncorrect Date or Time Wireless Signal Strength Supplemental Information Factory Settings Factory default settingsTechnical Specifications WPA2-PSK AES111 Netgear Dual Band Wireless Notification of ComplianceFCC Caution Avertissement Important Note Radiation Exposure Statement

Related manuals

Manual 2 pages 22.91 Kb