NETGEAR Mastering Address Reservation and DHCP Server Settings for Routers
Page 42

N600 Wireless Dual Band Gigabit Router WNDR3700v4

•Starting IP Address. Specify the start of the range for the pool of IP addresses in the same subnet as the router.

•Ending IP Address. Specify the end of the range for the pool of IP addresses in the same subnet as the router.

Address Reservation

When you specify a reserved IP address for a computer on the LAN, that computer receives the same IP address each time it accesses the router’s DHCP server. Assign reserved IP addresses to servers that require permanent IP settings. See Address Reservation on page 42.

Use the Router as a DHCP Server

By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default gateway addresses to all computers connected to the LAN. The assigned default gateway address is the LAN address of the router. The router assigns IP addresses to the attached computers from a pool of addresses specified in this screen. Each pool address is tested before it is assigned to avoid duplicate addresses on the LAN. For most applications, the default DHCP and TCP/IP settings of the router are satisfactory.

You can specify the pool of IP addresses that can be assigned by setting the starting IP address and ending IP address. These addresses should be part of the same IP address subnet as the router’s LAN IP address. Using the default addressing scheme, define a range between 192.168.1.2 and 192.168.1.254, although you might want to save part of the range for devices with fixed addresses.

The router delivers the following parameters to any LAN device that requests DHCP:

•An IP address from the range that you have defined

•Subnet mask

•Gateway IP address (the router’s LAN IP address)

•DNS server IP address (the router’s LAN IP address)

To use another device on your network as the DHCP server, or to specify the network settings of all of your computers, clear the Use Router as DHCP Server check box and click Apply. Otherwise, leave this check box selected. If this service is not enabled and no other DHCP server is available on your network, set your computers’ IP addresses manually so that they can access the router.

Address Reservation

When you specify a reserved IP address for a computer on the LAN, that computer always receives the same IP address each time it accesses the router’s DHCP server. Reserved IP addresses should be assigned to computers or servers that require permanent IP settings.

NETGEAR genie Advanced Home

42

Page 41 Page 43
Image 42
Page 41 Page 43
Contents N600 Wireless Dual Band Gigabit Router WNDR3700v4 October 2013 East Plumeria Drive San Jose, CASupport Contents Netgear genie Advanced Home Advanced Settings Appendix a Supplemental Information Hardware Setup Getting to know your routerHardware Features Unpack Your RouterFront Panel Icon Description Back Panel LabelAttach the Stand Position Your RouterCable Your Router Verify the Cabling N600 Wireless Dual Band Gigabit Router WNDR3700v4 Connecting the router Getting Started with Netgear GenieWireless Devices and Security Settings Router Setup PreparationTypes of Logins and Access Use Standard TCP/IP Properties for DhcpUse Netgear genie after Installation Upgrade the FirmwareDashboard Basic Home Screen Basic Home screen with dashboard, language, and online help To use WPS to join the wireless network Join Your Wireless NetworkWi-Fi Protected Setup WPS Method Manual MethodNetgear genie App and Mobile genie App Netgear genie Basic Settings Your Internet connection and networkInternet Setup  To view or change the basic Internet setupBasic Home Screen Internet Setup Screen Fields Does Your ISP Require a Login? Answer either yes or noInternet IP Address Attached Devices  To go to the Attached Devices screen To set up Live Parental Controls Parental ControlsN600 Wireless Dual Band Gigabit Router WNDR3700v4 ReadySHARE Storage Click the Take me to the status screen buttonBasic Wireless Settings  To view or change basic wireless settingsWireless Settings Screen Fields Wireless Network 2.4 GHz b/g/n and 5 GHzRegion Selection Change WPA Security Option and Password Security Options Settings To change the WPA settings  To set up a guest network Select Basic Guest Network Guest NetworksGuest Network Wireless Security Options WPA EncryptionSpecify custom settings Netgear genie Advanced HomeSetup Wizard  To use the Setup WizardNetgear genie Advanced Home Screen WPS Wizard  To use the WPS Wizard Select Advanced WPS WizardSelect either Push Button or PIN Number Setup Menu WAN Setup Default DMZ Server  To set up a default DMZ serverChange the MTU Size Common MTU sizesLAN Setup  To change the MTU size Select Advanced Setup WAN Setup To change the LAN settings LAN Setup Screen Settings LAN TCP/IP SetupUse Router as a Dhcp Server Use the Router as a Dhcp Server Address ReservationAddress Reservation  To configure QoS Quality of Service QoS SetupEnable WMM QoS for Wireless Multimedia Applications  To reserve an IP addressSet Up QoS for Internet Access QoS for Applications and Online Gaming To create a QoS policy for applications and online games Select the Turn Internet Access QoS On check box QoS for a Router LAN PortClick the Add Priority Rule button Edit or Delete an Existing QoS Policy  To edit or delete a QoS policy Select Advanced QoS SetupQoS for a MAC Address Click Add Priority RuleAccessing and configuring a USB storage StorageFile-Sharing Scenarios ReadySHARE Access To access the USB device from Windows Share PhotosStore Files in a Central Location for Printing Share Large Files over the Internet To share files with your friends and family Storage Basic Settings  To go to Storage Basic Settings Select Basic ReadySHARE To access your USB device Add or Edit a Network Folder Select Basic ReadySHARE, and click EditStorage Advanced Settings  To go to USB Storage Advanced SettingsSafely Remove a USB Drive Media ServerAvailable Network Folders Specify Approved USB Devices Select the Allow only approved devices check boxConnect to the USB Drive from a Remote Computer Access the Router USB Drive Remotely Using FTP To connect to the router’s USB drive using a web browser Ftp//10.1.65.4Keep unwanted content out of your network Security To delete a keyword or domain Keyword Blocking of Http TrafficSelect Advanced Security Block Sites  To specify a trusted computerBlock Services Port Filtering  To block services Select Advanced Security Block ServicesN600 Wireless Dual Band Gigabit Router WNDR3700v4 Schedule Blocking  To schedule blockingSecurity Event Email Notifications Administration Manage your network To check for new firmware and update your router Hardware Version. The router model View Router StatusRouter Information LAN PortInternet Port Show Statistics ButtonConnection Status Button View connection status informationWireless Settings 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access Restore Configuration Settings Manage the Configuration FileBack Up Settings EraseSet Password Password RecoveryAdvanced Settings Customize your networkAdvanced Wireless Settings Restrict Wireless Access by MAC Address  To restrict access based on MAC addressesWireless AP Select the Turn Access Control On check boxWireless Repeating Function WDS Select the Enable Access Point Mode check boxWireless repeating scenario  To view or change the Wireless Repeating Function settings Following settings are availableSet Up the Base Station  To set up the base stationSet Up a Repeater Unit  To configure the router as a repeater unitRemote Computer Access Basics Port Forwarding and Port TriggeringPort Triggering to Open Incoming Ports Destination port numberPort Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering Set Up Port Forwarding to Local Servers  To set up port forwardingAdd a Custom Service Edit or Delete a Port Forwarding Entry To edit or delete a port forwarding entry Application Example Making a Local Web Server Public Set Up Port TriggeringClick Edit Service or Delete Service  To make a local web server publicN600 Wireless Dual Band Gigabit Router WNDR3700v4  To set up Dynamic DNS Select the Use a Dynamic DNS Service check boxDynamic DNS Static Routes  To set up a static route Remote Management USB Settings Universal Plug and Play To turn on Universal Plug and Play  To set up an IPv6 Internet connection type IPv6IPv6 LAN Setup Auto Detect FieldsIPv6 Filtering Auto Config 6to4 Tunnel Pass ThroughIPv6 Fixed WAN Setup IPb6 Fixed LAN SetupFixed Dhcp PPPoE Traffic Meter Troubleshooting Quick Tips Power LED Is Off or Blinking Troubleshoot with the LEDsLEDs Never Turn Off Wireless 2.4 GHz and 5 GHz LEDs Are Off Cannot Log In to the RouterInternet LED Is Off Cannot Access the Internet Wireless Connectivity Changes Not SavedIncorrect Date or Time Wireless Signal Strength Supplemental Information Factory Settings Factory default settingsTechnical Specifications WPA2-PSK AES111 Netgear Dual Band Wireless Notification of ComplianceFCC Caution Avertissement Important Note Radiation Exposure Statement
Related manuals
Manual 2 pages 22.91 Kb
Top Page Image Contents