N600 Wireless Dual Band Gigabit Router WNDR3700v4
Enable SSID Broadcast. This setting allows the router to broadcast its SSID so wireless stations can see this wireless name (SSID) in their scanned network lists. This check box is selected by default. To turn off the SSID broadcast, clear the Enable SSID Broadcast check box and click Apply.
Enable Wireless Isolation. If this check box is selected, wireless computers or devices that join the network can use the Internet but cannot access each other or access Ethernet devices on the network.
Name (SSID). The SSID is also known as the wireless network name. Enter a
Channel. This setting is the wireless channel the gateway uses. Enter a value from 1 through
13.For products in the North America market, only channels 1 through 11 can be operated. Do not change the channel unless you experience interference (shown by lost connections or slow data transfers). If this happens, experiment with different channels to see which is the best.
Mode. Up to 130 Mbps is the default setting for the
Security Options Settings
The Security Options section of the Wireless Settings screen lets you change the security option and passphrase. NETGEAR recommends that you do not change the security option or passphrase, but if you want to change these settings, this section explains how. Do not disable security.
Change WPA Security Option and Password
You can change the security settings for your router. If you do so, write down the new settings and store them in a secure place for future reference.
To change the WPA settings:
1.On the Wireless Settings screen, under Security Options, select the WPA option you want.
2.In the Passphrase field that displays when you select a WPA security option, enter the network passphrase (password) that you want to use. It is a text string from 8 to 63 characters.
NETGEAR genie Basic Settings
30