NETGEAR WNDR3700V4 user manual Static Routes

Page 89

N600 Wireless Dual Band Gigabit Router WNDR3700v4

For example, for DynDNS.org, select www.dyndns.org.

4.Type the host name (or domain name) that your Dynamic DNS service provider gave you.

5.Type the user name for your Dynamic DNS account. This is the name that you use to log in to your account, not your host name.

6.Type the password (or key) for your Dynamic DNS account.

7.Click Apply to save your configuration.

Static Routes

Static routes provide additional routing information to your router. Typically, you do not need to add static routes. You have to configure static routes only for unusual cases such as multiple routers or multiple IP subnets on your network.

As an example of when a static route is needed, consider the following case:

•Your primary Internet access is through a cable modem to an ISP.

•You have an ISDN router on your home network for connecting to the company where you are employed. This router’s address on your LAN is 192.168.1.100.

•Your company’s network address is 134.177.0.0.

When you first configured your router, two implicit static routes were created. A default route was created with your ISP as the gateway, and a second static route was created to your local network for all 192.168.1.x addresses. With this configuration, if you attempt to access a device on the 134.177.0.0 network, your router forwards your request to the ISP. The ISP forwards your request to the company where you are employed, and the request is likely to be denied by the company’s firewall.

In this case you have to define a static route, telling your router that 134.177.0.0 should be accessed through the ISDN router at 192.168.1.100. In this example:

•The Destination IP Address and IP Subnet Mask fields specify that this static route applies to all 134.177.x.x addresses.

•The Gateway IP Address field specifies that all traffic for these addresses should be forwarded to the ISDN router at 192.168.1.100.

•A metric value of 1 works since the ISDN router is on the LAN.

•Private is selected only as a precautionary security measure in case RIP is activated.

Advanced Settings

89

Image 89

Contents October 2013 East Plumeria Drive San Jose, CA N600 Wireless Dual Band Gigabit Router WNDR3700v4Support Contents Netgear genie Advanced Home Advanced Settings Appendix a Supplemental Information Getting to know your router Hardware SetupFront Panel Hardware FeaturesUnpack Your Router Icon Description Label Back PanelPosition Your Router Attach the StandCable Your Router Verify the Cabling N600 Wireless Dual Band Gigabit Router WNDR3700v4 Getting Started with Netgear Genie Connecting the routerTypes of Logins and Access Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for DhcpUpgrade the Firmware Use Netgear genie after InstallationBasic Home screen with dashboard, language, and online help Dashboard Basic Home ScreenWi-Fi Protected Setup WPS Method Join Your Wireless Network To use WPS to join the wireless network Manual MethodNetgear genie App and Mobile genie App Your Internet connection and network Netgear genie Basic SettingsBasic Home Screen Internet Setup To view or change the basic Internet setup Internet IP Address Internet Setup Screen FieldsDoes Your ISP Require a Login? Answer either yes or no  To go to the Attached Devices screen Attached DevicesParental Controls  To set up Live Parental ControlsN600 Wireless Dual Band Gigabit Router WNDR3700v4 Click the Take me to the status screen button ReadySHARE Storage To view or change basic wireless settings Basic Wireless SettingsRegion Selection Wireless Settings Screen FieldsWireless Network 2.4 GHz b/g/n and 5 GHz  To change the WPA settings Change WPA Security Option and PasswordSecurity Options Settings Guest Networks  To set up a guest network Select Basic Guest NetworkWPA Encryption Guest Network Wireless Security OptionsNetgear genie Advanced Home Specify custom settingsNetgear genie Advanced Home Screen Setup Wizard To use the Setup Wizard Select either Push Button or PIN Number WPS Wizard To use the WPS Wizard Select Advanced WPS Wizard Setup Menu WAN Setup  To set up a default DMZ server Default DMZ ServerCommon MTU sizes Change the MTU Size To change the LAN settings LAN Setup To change the MTU size Select Advanced Setup WAN Setup Use Router as a Dhcp Server LAN Setup Screen SettingsLAN TCP/IP Setup Address Reservation Use the Router as a Dhcp ServerAddress Reservation Enable WMM QoS for Wireless Multimedia Applications Quality of Service QoS Setup To configure QoS  To reserve an IP address To create a QoS policy for applications and online games Set Up QoS for Internet AccessQoS for Applications and Online Gaming Click the Add Priority Rule button Select the Turn Internet Access QoS On check boxQoS for a Router LAN Port QoS for a MAC Address  To edit or delete a QoS policy Select Advanced QoS SetupEdit or Delete an Existing QoS Policy Click Add Priority RuleStorage Accessing and configuring a USB storage To access the USB device from Windows ReadySHARE AccessFile-Sharing Scenarios Share Photos To share files with your friends and family Store Files in a Central Location for PrintingShare Large Files over the Internet  To access your USB device Storage Basic Settings To go to Storage Basic Settings Select Basic ReadySHARE Select Basic ReadySHARE, and click Edit Add or Edit a Network Folder To go to USB Storage Advanced Settings Storage Advanced SettingsAvailable Network Folders Safely Remove a USB DriveMedia Server Select the Allow only approved devices check box Specify Approved USB Devices To connect to the router’s USB drive using a web browser Access the Router USB Drive Remotely Using FTPConnect to the USB Drive from a Remote Computer Ftp//10.1.65.4Security Keep unwanted content out of your networkSelect Advanced Security Block Sites Keyword Blocking of Http Traffic To delete a keyword or domain  To specify a trusted computer To block services Select Advanced Security Block Services Block Services Port FilteringN600 Wireless Dual Band Gigabit Router WNDR3700v4  To schedule blocking Schedule BlockingSecurity Event Email Notifications Manage your network Administration To check for new firmware and update your router Router Information View Router StatusHardware Version. The router model LAN PortShow Statistics Button Internet PortView connection status information Connection Status ButtonWireless Settings 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access Back Up Settings Manage the Configuration FileRestore Configuration Settings ErasePassword Recovery Set PasswordCustomize your network Advanced SettingsAdvanced Wireless Settings  To restrict access based on MAC addresses Restrict Wireless Access by MAC AddressSelect the Turn Access Control On check box Wireless APSelect the Enable Access Point Mode check box Wireless Repeating Function WDSWireless repeating scenario Following settings are available  To view or change the Wireless Repeating Function settings To set up the base station Set Up the Base Station To configure the router as a repeater unit Set Up a Repeater UnitPort Forwarding and Port Triggering Remote Computer Access BasicsDestination port number Port Triggering to Open Incoming PortsPort Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local Servers To edit or delete a port forwarding entry Add a Custom ServiceEdit or Delete a Port Forwarding Entry Click Edit Service or Delete Service Set Up Port TriggeringApplication Example Making a Local Web Server Public  To make a local web server publicN600 Wireless Dual Band Gigabit Router WNDR3700v4 Dynamic DNS  To set up Dynamic DNSSelect the Use a Dynamic DNS Service check box Static Routes  To set up a static route Remote Management  To turn on Universal Plug and Play USB SettingsUniversal Plug and Play IPv6  To set up an IPv6 Internet connection typeIPv6 Filtering IPv6 LAN SetupAuto Detect Fields Auto Config Pass Through 6to4 TunnelFixed IPv6 Fixed WAN SetupIPb6 Fixed LAN Setup Dhcp PPPoE Traffic Meter Troubleshooting Quick Tips LEDs Never Turn Off Power LED Is Off or BlinkingTroubleshoot with the LEDs Internet LED Is Off Wireless 2.4 GHz and 5 GHz LEDs Are OffCannot Log In to the Router Cannot Access the Internet Incorrect Date or Time Wireless ConnectivityChanges Not Saved Wireless Signal Strength Supplemental Information Factory default settings Factory SettingsWPA2-PSK AES Technical Specifications111 Notification of Compliance Netgear Dual Band WirelessFCC Caution Avertissement Important Note Radiation Exposure Statement

Related manuals

Manual 2 pages 22.91 Kb