NETGEAR WNDR3700V4 user manual  To view or change the Wireless Repeating Function settings

Page 77

N600 Wireless Dual Band Gigabit Router WNDR3700v4

station, dual-band concurrent mode is not affected.

For you to set up a wireless network with WDS, both access points must meet the following conditions:

•Both access points have to use the same SSID, wireless channel, and encryption mode.

•Both access points have to be on the same LAN IP subnet. That is, all the access point LAN IP addresses are in the same network.

•All LAN devices (wired and wireless computers) are configured to operate in the same LAN network address range as the access points.

To view or change the Wireless Repeating Function settings:

Select Advanced > Advanced Setup > Wireless Repeating to view or change wireless repeater settings for the router.

Scroll to view more settings

The following settings are available:

•Enable Wireless Repeating Function. Select the check box for the 2.4-GHz or 5-GHz network to use the wireless repeating function.

•Wireless MAC of this router. This field displays the MAC address for your router for your reference. You need to enter this MAC address in the corresponding Wireless Repeating Function screen of the other access point you are using.

•Wireless Repeater. If your router is the repeater, select this radio button.

Repeater IP Address. If your router is the repeater, enter the IP address of the other access point.

Advanced Settings

77

Image 77

Contents October 2013 East Plumeria Drive San Jose, CA N600 Wireless Dual Band Gigabit Router WNDR3700v4Support Contents Netgear genie Advanced Home Advanced Settings Appendix a Supplemental Information Getting to know your router Hardware SetupFront Panel Hardware FeaturesUnpack Your Router Icon Description Label Back PanelPosition Your Router Attach the StandCable Your Router Verify the Cabling N600 Wireless Dual Band Gigabit Router WNDR3700v4 Getting Started with Netgear Genie Connecting the routerTypes of Logins and Access Router Setup PreparationWireless Devices and Security Settings Use Standard TCP/IP Properties for DhcpUpgrade the Firmware Use Netgear genie after InstallationBasic Home screen with dashboard, language, and online help Dashboard Basic Home ScreenWi-Fi Protected Setup WPS Method Join Your Wireless Network To use WPS to join the wireless network Manual MethodNetgear genie App and Mobile genie App Your Internet connection and network Netgear genie Basic SettingsBasic Home Screen Internet Setup To view or change the basic Internet setup Internet IP Address Internet Setup Screen FieldsDoes Your ISP Require a Login? Answer either yes or no  To go to the Attached Devices screen Attached DevicesParental Controls  To set up Live Parental ControlsN600 Wireless Dual Band Gigabit Router WNDR3700v4 Click the Take me to the status screen button ReadySHARE Storage To view or change basic wireless settings Basic Wireless SettingsRegion Selection Wireless Settings Screen FieldsWireless Network 2.4 GHz b/g/n and 5 GHz  To change the WPA settings Change WPA Security Option and PasswordSecurity Options Settings Guest Networks  To set up a guest network Select Basic Guest NetworkWPA Encryption Guest Network Wireless Security OptionsNetgear genie Advanced Home Specify custom settingsNetgear genie Advanced Home Screen Setup Wizard To use the Setup Wizard Select either Push Button or PIN Number WPS Wizard To use the WPS Wizard Select Advanced WPS Wizard Setup Menu WAN Setup  To set up a default DMZ server Default DMZ ServerCommon MTU sizes Change the MTU Size To change the LAN settings LAN Setup To change the MTU size Select Advanced Setup WAN Setup Use Router as a Dhcp Server LAN Setup Screen SettingsLAN TCP/IP Setup Address Reservation Use the Router as a Dhcp ServerAddress Reservation Enable WMM QoS for Wireless Multimedia Applications Quality of Service QoS Setup To configure QoS  To reserve an IP address To create a QoS policy for applications and online games Set Up QoS for Internet AccessQoS for Applications and Online Gaming Click the Add Priority Rule button Select the Turn Internet Access QoS On check boxQoS for a Router LAN Port QoS for a MAC Address  To edit or delete a QoS policy Select Advanced QoS SetupEdit or Delete an Existing QoS Policy Click Add Priority RuleStorage Accessing and configuring a USB storage To access the USB device from Windows ReadySHARE AccessFile-Sharing Scenarios Share Photos To share files with your friends and family Store Files in a Central Location for PrintingShare Large Files over the Internet  To access your USB device Storage Basic Settings To go to Storage Basic Settings Select Basic ReadySHARE Select Basic ReadySHARE, and click Edit Add or Edit a Network Folder To go to USB Storage Advanced Settings Storage Advanced SettingsAvailable Network Folders Safely Remove a USB DriveMedia Server Select the Allow only approved devices check box Specify Approved USB Devices To connect to the router’s USB drive using a web browser Access the Router USB Drive Remotely Using FTPConnect to the USB Drive from a Remote Computer Ftp//10.1.65.4Security Keep unwanted content out of your networkSelect Advanced Security Block Sites Keyword Blocking of Http Traffic To delete a keyword or domain  To specify a trusted computer To block services Select Advanced Security Block Services Block Services Port FilteringN600 Wireless Dual Band Gigabit Router WNDR3700v4  To schedule blocking Schedule BlockingSecurity Event Email Notifications Manage your network Administration To check for new firmware and update your router Router Information View Router StatusHardware Version. The router model LAN PortShow Statistics Button Internet PortView connection status information Connection Status ButtonWireless Settings 2.4 GHz and 5 GHz View Logs of Web Access or Attempted Web Access Back Up Settings Manage the Configuration FileRestore Configuration Settings ErasePassword Recovery Set PasswordCustomize your network Advanced SettingsAdvanced Wireless Settings  To restrict access based on MAC addresses Restrict Wireless Access by MAC AddressSelect the Turn Access Control On check box Wireless APSelect the Enable Access Point Mode check box Wireless Repeating Function WDSWireless repeating scenario Following settings are available  To view or change the Wireless Repeating Function settings To set up the base station Set Up the Base Station To configure the router as a repeater unit Set Up a Repeater UnitPort Forwarding and Port Triggering Remote Computer Access BasicsDestination port number Port Triggering to Open Incoming PortsPort Forwarding to Permit External Host Communications How Port Forwarding Differs from Port Triggering  To set up port forwarding Set Up Port Forwarding to Local Servers To edit or delete a port forwarding entry Add a Custom ServiceEdit or Delete a Port Forwarding Entry Click Edit Service or Delete Service Set Up Port TriggeringApplication Example Making a Local Web Server Public  To make a local web server publicN600 Wireless Dual Band Gigabit Router WNDR3700v4 Dynamic DNS  To set up Dynamic DNSSelect the Use a Dynamic DNS Service check box Static Routes  To set up a static route Remote Management  To turn on Universal Plug and Play USB SettingsUniversal Plug and Play IPv6  To set up an IPv6 Internet connection typeIPv6 Filtering IPv6 LAN SetupAuto Detect Fields Auto Config Pass Through 6to4 TunnelFixed IPv6 Fixed WAN SetupIPb6 Fixed LAN Setup Dhcp PPPoE Traffic Meter Troubleshooting Quick Tips LEDs Never Turn Off Power LED Is Off or BlinkingTroubleshoot with the LEDs Internet LED Is Off Wireless 2.4 GHz and 5 GHz LEDs Are OffCannot Log In to the Router Cannot Access the Internet Incorrect Date or Time Wireless ConnectivityChanges Not Saved Wireless Signal Strength Supplemental Information Factory default settings Factory SettingsWPA2-PSK AES Technical Specifications111 Notification of Compliance Netgear Dual Band WirelessFCC Caution Avertissement Important Note Radiation Exposure Statement

Related manuals

Manual 2 pages 22.91 Kb