Wireless Router Setup Manual
2.When the Welcome screen displays, click Setup to start the Smart Wizard. Follow the wizard instructions.
3.When you are asked to log in, refer to the bottom label for the default login information, or see the steps in “Connecting Your Wireless Router”.
Manual Setup
There are two steps to setting up your wireless router:
1. Connect the router to the ADSL or cable modem, and connect a computer to the router.
Your computer has to be set to automatically get its TCP/IP network settings from the router through DHCP. This is usually the case. If you are unsure about this, use the wizard on the CD, which automatically takes care of this for you, or refer to the documentation for your computer.
2. Configure the router to use your Internet service.
Connecting Your Wireless Router
To connect your wireless router:
1.Connect the wireless router, the computer, and the modem.
a.Turn off your computer.
b.Turn off and unplug the cable or ADSL broadband modem.
10 | Getting to Know Your Wireless Router |
v1.0, November 2007