NETGEAR V1.0 manual Basic Troubleshooting, Common Things That Can Go Wrong

Page 25

Help with Troubleshooting

This chapter gives information about troubleshooting your wireless router. You can find help with the following problems:

“Common Things That Can Go Wrong”

“Basic Functions Are Not Working” on page 22

“I Am Unable to Log In to the Wireless Router” on page 23

“The Internet Service Connection Is Not Working” on page 23

“Testing the Path from a PC to Your Router” on page 26

“Testing the Path from a PC to the Internet” on page 27

Basic Troubleshooting

Here are some tips for correcting simple problems you might have.

Common Things That Can Go Wrong

Verify that you do not have these common problems.

Be sure to always start your network in this sequence:

1.Turn off and unplug the modem from its power outlet, and turn off the wireless router and computer.

2.Turn on the modem, and wait 2 minutes.

3.Turn on the wireless router, and wait 1 minute.

4.Turn on the computer.

Make sure that the Ethernet cables are securely plugged in:

1.Verify that the Internet status light on the wireless router is lit if the Ethernet cable to the wireless router from the modem is plugged in securely and the modem and wireless router are both turned on (see “Router Front Panel” on page 3).

Help with Troubleshooting

21

v1.0, November 2007

Image 25
Contents Wireless Router Setup Manual Trademarks Contents Contents Unpacking Your New Wireless Router Getting to Know Your Wireless RouterWireless Router Setup Manual Status Light Descriptions Router Front PanelLAN Router Back Panel Top Panel Wireless Router Setup Manual Bottom Label What You Need Before You BeginSmart Wizard Setup Two Setup Methods Smart Wizard Setup or Manual SetupUpdating Your Router Firmware Connecting Your Wireless Router Manual SetupInternet Wireless Router Setup Manual Http//192.168.1.1 Wireless Router Setup Manual Product Registration, Support, and Documentation To access the router using its login name and password To update your router firmware Setting Up and Testing Basic Wireless Connectivity To set up and test basic wireless connectivity Implementing Appropriate Wireless Security Common Things That Can Go Wrong Basic TroubleshootingBasic Functions Are Not Working Internet Service Connection Is Not Working Am Unable to Log In to the Wireless RouterObtaining an Internet IP Address Troubleshooting PPPoE Testing the Path from a PC to Your Router Troubleshooting Connectivity Using the Ping UtilityTesting the Path from a PC to the Internet Wireless Router Setup Manual Default Configuration Settings Default ConfigurationNetwork Protocol and Standards Compatibility Feature Default Setting Physical Specifications Feature Default Setting Restoring the Default Password and Configuration SettingsRelated Documents Wireless Router Setup Manual Registration and Certifications