Wireless Router Setup Manual
If a port’s light is lit, a link has been established to the connected device. If a LAN port is connected to a 100 Mbps device, verify that the port’s light is green. If the port is 10 Mbps, the light is amber.
For more information about the status lights, see “Router Front Panel” on page 3.
If the LAN or Internet port lights are not on when the Ethernet connection is made:
1.Make sure that the Ethernet cable connections are secure at the router and at the computer.
2.Make sure that power is turned on to the connected computer.
3.Make sure that you are using Ethernet cables like the cable that was supplied with the wireless router.
I Am Unable to Log In to the Wireless Router
If you are unable to log in to the wireless router, check the following:
•If you are using an
•Make sure that you are using the correct login information. The factory default login name is admin, and the password is password. Make sure that Caps Lock is off when you enter this information.
•Typically, your computer’s address should be in the range of 255.255.255.0.2 to 255.255.255.0.254. Refer to your computer’s documentation for help with finding your computer’s IP address.
If your computer’s IP address is 169.254.x.x, verify that you have a good connection from the computer to the router, and then restart your computer.
•Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet Explorer, click Refresh to be sure that the Java applet is loaded. Try closing the browser and starting it again.
The Internet Service Connection Is Not Working
If your router is unable to access the Internet, check that the Internet connection is working, and then check that the wireless router can get an Internet address.
Help with Troubleshooting | 23 |
v1.0, November 2007