NETGEAR WGE101 manual

Page 11

9.Click OK twice to close the Network control panel and save any changes.

10.If you made a change, restart the computer.

Note: After you’ve changed the settings on the bridge, you’ll have to reset the TCP/IP

Properties: IP Address tab values back to their original state.

Windows 2000/XP

1.Right-clickMy Network Place and choose Properties.

2.Double-clickLocal Area Network Connection and click Properties.

3.Select Internet Protocol (TCP/IP) and click Properties.

4.If Obtain an IP address automatically is selected, select Use the following IP Address.

OR

If Use the following IP Address is selected, note the current IP address.

5.Change the IP address to 192.168.0.230.

6.Click OK twice and click Close to save any changes.

7.If you made a change, restart the computer.

Note: After you’ve changed the settings on the bridge, you’ll have to reset the Internet Protocol (TCP/IP) Properties dialog box back to its original state.

Mac OS® 8.6 or 9.x

1.Choose Control Panels >TCP/IP from the Apple () menu.

2.If not already selected, select Ethernet in the Connect via list.

3.If Manually isn’t selected in the Configure list, note the current selection and select Manually.

OR

If Manually is selected, note the current IP address.

4.Change the IP address to 192.168.0.230 and click the close box.

5. If asked, click Save.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Table of Contents Introduction Preparing to Install the WGE101 BridgePackage Contents Operating Modes Placement and Range GuidelinesSystem Requirements IP address WGE101 Default Wireless Configuration SettingsConnecting the Bridge to a Single Device Installing the WGE101 BridgeConnecting the Bridge to Multiple Devices WGR614 54 Mpbs Wireless Router WGE101 54 Mbps Identifying Your Wireless Network Settings Preparing To Configure the WGE101 BridgeChecking and Changing the Computer’s IP Address Connecting the Bridge to a ComputerPage Linux and Unix Changing the Bridge’s IP AddressMac OS Choose System Preferences from the Apple  menu Click Apply Click Logout Using the NetBIOS NameClick Wireless Settings Configuring the WGE101 Bridge for Your Wireless NetworkChanging the Country/Region Setting Changing the Bridge’s Password Selecting a Specific Wireless NetworkEnabling WEP Security Click Change PasswordWireless Settings Upgrading the Bridge Configuring the Bridge for Ad-Hoc Mode Setting the Bridge’s Data Rate Status Lights WGE101 Bridge Status Lights and SettingsRestoring the Bridge to the Default Settings Status Information Symptom Cause Solution Troubleshooting TipsSymptom Solution Cause System Requirements for the Bridge WGE101 System Requirements and SpecificationsBridge Specifications Environmental SpecificationsStatement of Conditions Support Information Technical Support

WGE101 specifications

The NETGEAR WGE101 is a pioneering wireless gaming adapter that enables online gaming on consoles without the need for a wired connection. Designed primarily to support gaming consoles like the PlayStation 2, Xbox, and other Ethernet-enabled devices, this adapter bridges the gap between traditional gaming setups and modern wireless networking technologies. With its compact design and user-friendly setup, the WGE101 has become a popular choice among gamers seeking to enhance their gaming experience.

One of the key features of the NETGEAR WGE101 is its wireless compatibility. It operates on the IEEE 802.11b standard, providing a wireless connection with a maximum throughput of up to 11 Mbps. While this may seem modest by today’s standards, it was quite effective during the adapter's peak usage and sufficient for many online gaming applications. The WGE101 supports a range of wireless security protocols including WEP and WPA, ensuring a secure connection for users.

The setup process of the WGE101 is notably straightforward. It features a plug-and-play design, allowing users to connect it directly to their gaming console via an Ethernet cable. The built-in configuration utility simplifies the connection to the home Wi-Fi network, making it accessible even for those who may not be tech-savvy. Additionally, the WGE101’s compact size allows it to be conveniently placed near a gaming console without taking up much space.

The NETGEAR WGE101 also boasts advanced features such as QoS (Quality of Service) capabilities that prioritize gaming traffic over other types of data. This ensures that online gaming sessions can proceed smoothly without significant lag, even when other devices are using the network. Moreover, its ability to work seamlessly with a variety of routers enhances flexibility for users.

Furthermore, the WGE101 includes an LED indicator that provides real-time feedback on connection status, helping users troubleshoot potential connectivity issues. This added convenience is critical for gamers who desire uninterrupted gameplay.

In conclusion, the NETGEAR WGE101 wireless gaming adapter remains a noteworthy option for gamers looking to connect their consoles to the internet wirelessly. With its reliable performance, easy setup, and essential features tailored for gaming, the WGE101 has made a lasting impact in the realm of online gaming connectivity.
Top Page Image Contents