NETGEAR WGE101 manual Changing the Bridge’s IP Address, Linux and Unix

Page 12

Note: After you’ve changed the settings on the bridge, you’ll have to reset the TCP/IP dialog box back to its original state.

Mac OS X

1.Choose System Preferences from the Apple () menu.

2.Double-click Network.

3.If not already selected, select Built-in Ethernet in the Configure list.

4.If Manually isn’t selected in the Configure list, note the current selection and select Manually.

OR

If Manually is selected, note the current IP address.

5.Change the IP address to 192.168.0.230 and click Apply Now.

Note: After you’ve changed the settings on the bridge, you’ll have to reset the Network: TCP/IP dialog box back to its original state.

Linux® and UNIX®

If you’re configuring the bridge with a Linux-based or UNIX-based computer see your system documentation for TCP/IP and networking setup information.

Changing the Bridge’s IP Address

1.Start your browser software.

2.Type http://192.168.0.201 as the web address and press Enter (or Return).

3.Type admin as the User ID and type password as the Password.

4.Click OK.

You’ll see the Status page.

5.To change the IP address for the bridge to match your wireless network, click IP Settings.

6.Select Use this IP address and type a unique IP address for the bridge. The first three sets of numbers (xxx.xxx.xxx.yyy) should be the same as your access point or router. The last set of numbers (.yyy) should be a set of unique numbers on your network.

OR

If your network has a router with a router table, change the Protocol to DHCP.

(By doing this, the bridge’s IP address is assigned dynamically by the router and you’ll use

the router table to find out what the bridge’s current IP address is.)

10

Image 12
Contents Page Table of Contents Preparing to Install the WGE101 Bridge Package ContentsIntroduction Placement and Range Guidelines System RequirementsOperating Modes WGE101 Default Wireless Configuration Settings IP addressInstalling the WGE101 Bridge Connecting the Bridge to a Single DeviceConnecting the Bridge to Multiple Devices WGR614 54 Mpbs Wireless Router WGE101 54 Mbps Preparing To Configure the WGE101 Bridge Identifying Your Wireless Network SettingsConnecting the Bridge to a Computer Checking and Changing the Computer’s IP AddressPage Changing the Bridge’s IP Address Mac OS Choose System Preferences from the Apple  menuLinux and Unix Using the NetBIOS Name Click Apply Click LogoutConfiguring the WGE101 Bridge for Your Wireless Network Changing the Country/Region SettingClick Wireless Settings Selecting a Specific Wireless Network Changing the Bridge’s PasswordClick Change Password Wireless SettingsEnabling WEP Security Upgrading the Bridge Configuring the Bridge for Ad-Hoc Mode Setting the Bridge’s Data Rate WGE101 Bridge Status Lights and Settings Restoring the Bridge to the Default SettingsStatus Lights Status Information Troubleshooting Tips Symptom Cause SolutionSymptom Solution Cause WGE101 System Requirements and Specifications Bridge SpecificationsEnvironmental Specifications System Requirements for the BridgeStatement of Conditions Technical Support Support Information

WGE101 specifications

The NETGEAR WGE101 is a pioneering wireless gaming adapter that enables online gaming on consoles without the need for a wired connection. Designed primarily to support gaming consoles like the PlayStation 2, Xbox, and other Ethernet-enabled devices, this adapter bridges the gap between traditional gaming setups and modern wireless networking technologies. With its compact design and user-friendly setup, the WGE101 has become a popular choice among gamers seeking to enhance their gaming experience.

One of the key features of the NETGEAR WGE101 is its wireless compatibility. It operates on the IEEE 802.11b standard, providing a wireless connection with a maximum throughput of up to 11 Mbps. While this may seem modest by today’s standards, it was quite effective during the adapter's peak usage and sufficient for many online gaming applications. The WGE101 supports a range of wireless security protocols including WEP and WPA, ensuring a secure connection for users.

The setup process of the WGE101 is notably straightforward. It features a plug-and-play design, allowing users to connect it directly to their gaming console via an Ethernet cable. The built-in configuration utility simplifies the connection to the home Wi-Fi network, making it accessible even for those who may not be tech-savvy. Additionally, the WGE101’s compact size allows it to be conveniently placed near a gaming console without taking up much space.

The NETGEAR WGE101 also boasts advanced features such as QoS (Quality of Service) capabilities that prioritize gaming traffic over other types of data. This ensures that online gaming sessions can proceed smoothly without significant lag, even when other devices are using the network. Moreover, its ability to work seamlessly with a variety of routers enhances flexibility for users.

Furthermore, the WGE101 includes an LED indicator that provides real-time feedback on connection status, helping users troubleshoot potential connectivity issues. This added convenience is critical for gamers who desire uninterrupted gameplay.

In conclusion, the NETGEAR WGE101 wireless gaming adapter remains a noteworthy option for gamers looking to connect their consoles to the internet wirelessly. With its reliable performance, easy setup, and essential features tailored for gaming, the WGE101 has made a lasting impact in the realm of online gaming connectivity.