NETGEAR manual WGE101 Default Wireless Configuration Settings, IP address

Page 5

WGE101 Default Wireless Configuration Settings

Note: If you are setting up a new wireless network, please set up the network and make sure it works before adding the WGE101 Wireless Ethernet Bridge into the network.

You will need to identify the wireless configuration and security parameters already defined in your wireless network.

Note: All NETGEAR, Inc. 802.11g and 802.11b wireless access products use similar factory settings as the WGE101 and will work without any configuration changes.

The factory default settings for your WGE101 54 Mbps Wireless Ethernet Bridge are:

•Mode (Infrastructure or Ad-Hoc): Infrastructure

•Wireless network name Service Set Identification (SSID): Any

Note: Any means the bridge will connect to the access point or wireless router that has the strongest signal. This may not be the closest access point or wireless router. For the WGE101 Wireless Ethernet Bridge to communicate with a specific wireless router or access point, both devices must be configured with the same SSID.

•User ID: admin

•Password: password

•Authentication type: Auto

•WEP security: Disabled

•Country/Region: United States

Warning: Having the bridge set to the wrong country or region may result in the violation of local laws.

WGE101-specific default settings:

•IP address: 192.168.0.201

•Protocol: Static

•Device name: netgearxxxx (where xxxx is the last 4 digits of the MAC address)

•Data rate: b/g combo

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Table of Contents Introduction Preparing to Install the WGE101 BridgePackage Contents Operating Modes Placement and Range GuidelinesSystem Requirements IP address WGE101 Default Wireless Configuration SettingsConnecting the Bridge to a Single Device Installing the WGE101 BridgeConnecting the Bridge to Multiple Devices WGR614 54 Mpbs Wireless Router WGE101 54 Mbps Identifying Your Wireless Network Settings Preparing To Configure the WGE101 BridgeChecking and Changing the Computer’s IP Address Connecting the Bridge to a ComputerPage Linux and Unix Changing the Bridge’s IP AddressMac OS Choose System Preferences from the Apple  menu Click Apply Click Logout Using the NetBIOS NameClick Wireless Settings Configuring the WGE101 Bridge for Your Wireless NetworkChanging the Country/Region Setting Changing the Bridge’s Password Selecting a Specific Wireless NetworkEnabling WEP Security Click Change PasswordWireless Settings Upgrading the Bridge Configuring the Bridge for Ad-Hoc Mode Setting the Bridge’s Data Rate Status Lights WGE101 Bridge Status Lights and SettingsRestoring the Bridge to the Default Settings Status Information Symptom Cause Solution Troubleshooting TipsSymptom Solution Cause Bridge Specifications WGE101 System Requirements and SpecificationsEnvironmental Specifications System Requirements for the BridgeStatement of Conditions Support Information Technical Support

WGE101 specifications

The NETGEAR WGE101 is a pioneering wireless gaming adapter that enables online gaming on consoles without the need for a wired connection. Designed primarily to support gaming consoles like the PlayStation 2, Xbox, and other Ethernet-enabled devices, this adapter bridges the gap between traditional gaming setups and modern wireless networking technologies. With its compact design and user-friendly setup, the WGE101 has become a popular choice among gamers seeking to enhance their gaming experience.

One of the key features of the NETGEAR WGE101 is its wireless compatibility. It operates on the IEEE 802.11b standard, providing a wireless connection with a maximum throughput of up to 11 Mbps. While this may seem modest by today’s standards, it was quite effective during the adapter's peak usage and sufficient for many online gaming applications. The WGE101 supports a range of wireless security protocols including WEP and WPA, ensuring a secure connection for users.

The setup process of the WGE101 is notably straightforward. It features a plug-and-play design, allowing users to connect it directly to their gaming console via an Ethernet cable. The built-in configuration utility simplifies the connection to the home Wi-Fi network, making it accessible even for those who may not be tech-savvy. Additionally, the WGE101’s compact size allows it to be conveniently placed near a gaming console without taking up much space.

The NETGEAR WGE101 also boasts advanced features such as QoS (Quality of Service) capabilities that prioritize gaming traffic over other types of data. This ensures that online gaming sessions can proceed smoothly without significant lag, even when other devices are using the network. Moreover, its ability to work seamlessly with a variety of routers enhances flexibility for users.

Furthermore, the WGE101 includes an LED indicator that provides real-time feedback on connection status, helping users troubleshoot potential connectivity issues. This added convenience is critical for gamers who desire uninterrupted gameplay.

In conclusion, the NETGEAR WGE101 wireless gaming adapter remains a noteworthy option for gamers looking to connect their consoles to the internet wirelessly. With its reliable performance, easy setup, and essential features tailored for gaming, the WGE101 has made a lasting impact in the realm of online gaming connectivity.
Top Page Image Contents