NETGEAR manual Configuring the WGE101 Bridge for Your Wireless Network, Click Wireless Settings

Page 14

Configuring the WGE101 Bridge for Your

4 Wireless Network

You use browser-based configuration software to configure the bridge. To do so, you must have the bridge connected to a computer (either directly or through a switch or hub) that has an Internet browser installed. See Installing the WGE101 Bridge on page 4 or Connecting the Bridge to a Computer on page 8.

Once you are logged into the configuration software, you can view the status of your wireless network and the bridge’s current configuration, change the password, enable WEP security (if you have it set up on your wireless network), select a specific network for the wireless connection, or make other configuration changes.

Changing the Country/Region Setting

If you are not in the United States, you must first change the Country/Region selection.

1.Start your browser software.

2.Type http:// followed by the bridge’s IP address as the web address and press Enter (or Return).

Note: The default value is 192.168.0.201. If you’ve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge.

3.Type admin as the User ID and type password as the Password.

4.Click OK.

You’ll see the Status page.

5.Click Wireless Settings.

6.Select the correct country or region from the Country/Region list. Click Yes to accept the new country or region.

Warning: Having the bridge set to the wrong country or region may result in the violation of local laws.

7.Click Apply.

8.Click OK.

9.If you are through making changes, click Logout.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Page Table of Contents Introduction Preparing to Install the WGE101 BridgePackage Contents Operating Modes Placement and Range GuidelinesSystem Requirements WGE101 Default Wireless Configuration Settings IP addressInstalling the WGE101 Bridge Connecting the Bridge to a Single DeviceConnecting the Bridge to Multiple Devices WGR614 54 Mpbs Wireless Router WGE101 54 Mbps Preparing To Configure the WGE101 Bridge Identifying Your Wireless Network SettingsConnecting the Bridge to a Computer Checking and Changing the Computer’s IP AddressPage Linux and Unix Changing the Bridge’s IP AddressMac OS Choose System Preferences from the Apple  menu Using the NetBIOS Name Click Apply Click LogoutClick Wireless Settings Configuring the WGE101 Bridge for Your Wireless NetworkChanging the Country/Region Setting Selecting a Specific Wireless Network Changing the Bridge’s PasswordEnabling WEP Security Click Change PasswordWireless Settings Upgrading the Bridge Configuring the Bridge for Ad-Hoc Mode Setting the Bridge’s Data Rate Status Lights WGE101 Bridge Status Lights and SettingsRestoring the Bridge to the Default Settings Status Information Troubleshooting Tips Symptom Cause SolutionSymptom Solution Cause Environmental Specifications WGE101 System Requirements and SpecificationsBridge Specifications System Requirements for the BridgeStatement of Conditions Technical Support Support Information

WGE101 specifications

The NETGEAR WGE101 is a pioneering wireless gaming adapter that enables online gaming on consoles without the need for a wired connection. Designed primarily to support gaming consoles like the PlayStation 2, Xbox, and other Ethernet-enabled devices, this adapter bridges the gap between traditional gaming setups and modern wireless networking technologies. With its compact design and user-friendly setup, the WGE101 has become a popular choice among gamers seeking to enhance their gaming experience.

One of the key features of the NETGEAR WGE101 is its wireless compatibility. It operates on the IEEE 802.11b standard, providing a wireless connection with a maximum throughput of up to 11 Mbps. While this may seem modest by today’s standards, it was quite effective during the adapter's peak usage and sufficient for many online gaming applications. The WGE101 supports a range of wireless security protocols including WEP and WPA, ensuring a secure connection for users.

The setup process of the WGE101 is notably straightforward. It features a plug-and-play design, allowing users to connect it directly to their gaming console via an Ethernet cable. The built-in configuration utility simplifies the connection to the home Wi-Fi network, making it accessible even for those who may not be tech-savvy. Additionally, the WGE101’s compact size allows it to be conveniently placed near a gaming console without taking up much space.

The NETGEAR WGE101 also boasts advanced features such as QoS (Quality of Service) capabilities that prioritize gaming traffic over other types of data. This ensures that online gaming sessions can proceed smoothly without significant lag, even when other devices are using the network. Moreover, its ability to work seamlessly with a variety of routers enhances flexibility for users.

Furthermore, the WGE101 includes an LED indicator that provides real-time feedback on connection status, helping users troubleshoot potential connectivity issues. This added convenience is critical for gamers who desire uninterrupted gameplay.

In conclusion, the NETGEAR WGE101 wireless gaming adapter remains a noteworthy option for gamers looking to connect their consoles to the internet wirelessly. With its reliable performance, easy setup, and essential features tailored for gaming, the WGE101 has made a lasting impact in the realm of online gaming connectivity.
Top Page Image Contents