NETGEAR WGE101 manual Setting the Bridge’s Data Rate

Page 19

Setting the Bridge’s Data Rate

The wireless Ethernet standard, 802.11, supports several data rates — the most common are the 802.11b and the 802.11g standards. The 802.11b standard is slower with a maximum data rate of 11 Mbps. The 802.11g standard supports data rates up to 54 Mbps. By default the WGE101 bridge is set to connect at either standard, but it tries first using the 802.11g standard. If you want to force the bridge to connect using a specific standard, you can set the Data Rate on the Wireless Settings page.

Note: The actual data rates achieved can be much lower than the maximum depending on the devices, distances, and any interference.

1.Start your browser software.

2.Type http:// followed by the IP address for the bridge as the web address and press Enter (or Return).

Note: The default value is 192.168.0.201. If you’ve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge.

3.Type admin as the User ID and type the current password. (password is the default.)

4.Click OK.

You’ll see the Status page.

5.Click Wireless Settings.

6.Select either B only (802.11b) or G only (802.11g) as the Data Rate.

7.Click Apply.

8.If you are through making changes, click Logout.

17

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Page Table of Contents Package Contents Preparing to Install the WGE101 BridgeIntroduction System Requirements Placement and Range GuidelinesOperating Modes IP address WGE101 Default Wireless Configuration SettingsConnecting the Bridge to a Single Device Installing the WGE101 BridgeConnecting the Bridge to Multiple Devices WGR614 54 Mpbs Wireless Router WGE101 54 Mbps Identifying Your Wireless Network Settings Preparing To Configure the WGE101 BridgeChecking and Changing the Computer’s IP Address Connecting the Bridge to a ComputerPage Mac OS Choose System Preferences from the Apple  menu Changing the Bridge’s IP AddressLinux and Unix Click Apply Click Logout Using the NetBIOS NameChanging the Country/Region Setting Configuring the WGE101 Bridge for Your Wireless NetworkClick Wireless Settings Changing the Bridge’s Password Selecting a Specific Wireless NetworkWireless Settings Click Change PasswordEnabling WEP Security Upgrading the Bridge Configuring the Bridge for Ad-Hoc Mode Setting the Bridge’s Data Rate Restoring the Bridge to the Default Settings WGE101 Bridge Status Lights and SettingsStatus Lights Status Information Symptom Cause Solution Troubleshooting TipsSymptom Solution Cause System Requirements for the Bridge WGE101 System Requirements and SpecificationsBridge Specifications Environmental SpecificationsStatement of Conditions Support Information Technical Support

WGE101 specifications

The NETGEAR WGE101 is a pioneering wireless gaming adapter that enables online gaming on consoles without the need for a wired connection. Designed primarily to support gaming consoles like the PlayStation 2, Xbox, and other Ethernet-enabled devices, this adapter bridges the gap between traditional gaming setups and modern wireless networking technologies. With its compact design and user-friendly setup, the WGE101 has become a popular choice among gamers seeking to enhance their gaming experience.

One of the key features of the NETGEAR WGE101 is its wireless compatibility. It operates on the IEEE 802.11b standard, providing a wireless connection with a maximum throughput of up to 11 Mbps. While this may seem modest by today’s standards, it was quite effective during the adapter's peak usage and sufficient for many online gaming applications. The WGE101 supports a range of wireless security protocols including WEP and WPA, ensuring a secure connection for users.

The setup process of the WGE101 is notably straightforward. It features a plug-and-play design, allowing users to connect it directly to their gaming console via an Ethernet cable. The built-in configuration utility simplifies the connection to the home Wi-Fi network, making it accessible even for those who may not be tech-savvy. Additionally, the WGE101’s compact size allows it to be conveniently placed near a gaming console without taking up much space.

The NETGEAR WGE101 also boasts advanced features such as QoS (Quality of Service) capabilities that prioritize gaming traffic over other types of data. This ensures that online gaming sessions can proceed smoothly without significant lag, even when other devices are using the network. Moreover, its ability to work seamlessly with a variety of routers enhances flexibility for users.

Furthermore, the WGE101 includes an LED indicator that provides real-time feedback on connection status, helping users troubleshoot potential connectivity issues. This added convenience is critical for gamers who desire uninterrupted gameplay.

In conclusion, the NETGEAR WGE101 wireless gaming adapter remains a noteworthy option for gamers looking to connect their consoles to the internet wirelessly. With its reliable performance, easy setup, and essential features tailored for gaming, the WGE101 has made a lasting impact in the realm of online gaming connectivity.
Top Page Image Contents