NETGEAR WGE101 manual Connecting the Bridge to a Computer

Page 10

Connecting the Bridge to a Computer

You use browser-based configuration software to configure the bridge. To access the software, the bridge must be directly connected or connected through a switch (or hub) to a computer. The computer must have an Internet browser installed. For example, if the bridge is connected to a game box, you’ll have to connect the bridge to a computer to be able to configure the bridge.

To connect the bridge to a computer:

1.If your network has a wireless router or access point, make sure it is powered up.

2.Power down the Ethernet-enabled computer.

3.Connect the provided Ethernet cable between the computer and the bridge.

4.Power up the bridge.

5.Power on the computer.

WGE101 54 Mpbs Wireless Ethernet Bridge

Checking and Changing the Computer’s IP Address

If your wireless network has an IP address other than 192.168.0.yyy, you need to change the IP address on the computer before you can access the browser-based configuration software.

Note: All NETGEAR products use 192.168.0.yyy. If you have NETGEAR wireless products working in your wireless network without configuration changes, you won’t need to check or change IP addresses.

Windows 98/Me

1. Choose Settings>Control Panel from the Start menu.

2. Double-click the Network icon.

3. Click the Configuration tab.

4. In the list of installed network components, select the TCP/IP entry for the computer’s Ethernet adapter or NIC.

5. Click Properties.

6. Click the IP Address tab.

7. If Obtain an IP address automatically is selected, select Specify an IP Address.

OR

If Specify an IP Address is already selected, note the current IP address.

8. Change the IP address to 192.168.0.230.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Table of Contents Package Contents Preparing to Install the WGE101 BridgeIntroduction System Requirements Placement and Range GuidelinesOperating Modes WGE101 Default Wireless Configuration Settings IP addressInstalling the WGE101 Bridge Connecting the Bridge to a Single DeviceConnecting the Bridge to Multiple Devices WGR614 54 Mpbs Wireless Router WGE101 54 Mbps Preparing To Configure the WGE101 Bridge Identifying Your Wireless Network SettingsConnecting the Bridge to a Computer Checking and Changing the Computer’s IP AddressPage Mac OS Choose System Preferences from the Apple  menu Changing the Bridge’s IP AddressLinux and Unix Using the NetBIOS Name Click Apply Click LogoutChanging the Country/Region Setting Configuring the WGE101 Bridge for Your Wireless NetworkClick Wireless Settings Selecting a Specific Wireless Network Changing the Bridge’s PasswordWireless Settings Click Change PasswordEnabling WEP Security Upgrading the Bridge Configuring the Bridge for Ad-Hoc Mode Setting the Bridge’s Data Rate Restoring the Bridge to the Default Settings WGE101 Bridge Status Lights and SettingsStatus Lights Status Information Troubleshooting Tips Symptom Cause SolutionSymptom Solution Cause Environmental Specifications WGE101 System Requirements and SpecificationsBridge Specifications System Requirements for the BridgeStatement of Conditions Technical Support Support Information

WGE101 specifications

The NETGEAR WGE101 is a pioneering wireless gaming adapter that enables online gaming on consoles without the need for a wired connection. Designed primarily to support gaming consoles like the PlayStation 2, Xbox, and other Ethernet-enabled devices, this adapter bridges the gap between traditional gaming setups and modern wireless networking technologies. With its compact design and user-friendly setup, the WGE101 has become a popular choice among gamers seeking to enhance their gaming experience.

One of the key features of the NETGEAR WGE101 is its wireless compatibility. It operates on the IEEE 802.11b standard, providing a wireless connection with a maximum throughput of up to 11 Mbps. While this may seem modest by today’s standards, it was quite effective during the adapter's peak usage and sufficient for many online gaming applications. The WGE101 supports a range of wireless security protocols including WEP and WPA, ensuring a secure connection for users.

The setup process of the WGE101 is notably straightforward. It features a plug-and-play design, allowing users to connect it directly to their gaming console via an Ethernet cable. The built-in configuration utility simplifies the connection to the home Wi-Fi network, making it accessible even for those who may not be tech-savvy. Additionally, the WGE101’s compact size allows it to be conveniently placed near a gaming console without taking up much space.

The NETGEAR WGE101 also boasts advanced features such as QoS (Quality of Service) capabilities that prioritize gaming traffic over other types of data. This ensures that online gaming sessions can proceed smoothly without significant lag, even when other devices are using the network. Moreover, its ability to work seamlessly with a variety of routers enhances flexibility for users.

Furthermore, the WGE101 includes an LED indicator that provides real-time feedback on connection status, helping users troubleshoot potential connectivity issues. This added convenience is critical for gamers who desire uninterrupted gameplay.

In conclusion, the NETGEAR WGE101 wireless gaming adapter remains a noteworthy option for gamers looking to connect their consoles to the internet wirelessly. With its reliable performance, easy setup, and essential features tailored for gaming, the WGE101 has made a lasting impact in the realm of online gaming connectivity.
Top Page Image Contents