NETGEAR manual Installing the WGE101 Bridge, Connecting the Bridge to a Single Device

Page 6

2 Installing the WGE101 Bridge

Internet

Cable/DSL modem

WGR814 54 Mbps

Cable/DSL Wireless Router

Desktop PC with Ethernet connection

family

room

Macintosh computer with

WGE101 54 Mbps Wireless

Ethernet Bridge

Gaming console with

WGE101 54 Mbps Wireless

Ethernet Bridge

This section provides instructions for connecting the WGE101 54 Mbps Wireless Ethernet Bridge, using the default settings, to either a single Ethernet-enabled device or to multiple devices through a switch or hub.

Note: If you find that the default settings don’t work, if you know that you’ve configured your wireless network with WEP security, if you’re placing more than one WGE101 bridge on the network, or if you are not in the United States, you’ll have to configure the bridge before connecting it to the Ethernet-enabled device(s). To configure the bridge, see Configuring the WGE101 Bridge for Your Wireless Network on page 12.

Connecting the Bridge to a Single Device

1.Unpack the box and verify the contents.

2.Identify a flat surface where you will put the wireless bridge. For best results, follow these guidelines:

•Place it away from potential sources of interference, such as computers, monitors, TVs, microwaves, cordless phones, or large metal surfaces.

Warning: Failure to follow these guidelines can cause intermittent or complete failure of wireless connectivity.

•Place it in an elevated location such as a high shelf or on a wall in the center of your wireless access area. If you mount the bridge on a wall, do not place the bridge

in such a way that it is vertical with the NETGEAR name upside-down and the power adapter plug hanging from the bottom of the unit. Having the unit in this position violates power adapter regulations.

3.Lift the bridge’s antenna so it is vertical.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Table of Contents Preparing to Install the WGE101 Bridge Package ContentsIntroduction Placement and Range Guidelines System RequirementsOperating Modes WGE101 Default Wireless Configuration Settings IP addressInstalling the WGE101 Bridge Connecting the Bridge to a Single DeviceConnecting the Bridge to Multiple Devices WGR614 54 Mpbs Wireless Router WGE101 54 Mbps Preparing To Configure the WGE101 Bridge Identifying Your Wireless Network SettingsConnecting the Bridge to a Computer Checking and Changing the Computer’s IP AddressPage Changing the Bridge’s IP Address Mac OS Choose System Preferences from the Apple  menuLinux and Unix Using the NetBIOS Name Click Apply Click LogoutConfiguring the WGE101 Bridge for Your Wireless Network Changing the Country/Region SettingClick Wireless Settings Selecting a Specific Wireless Network Changing the Bridge’s PasswordClick Change Password Wireless SettingsEnabling WEP Security Upgrading the Bridge Configuring the Bridge for Ad-Hoc Mode Setting the Bridge’s Data Rate WGE101 Bridge Status Lights and Settings Restoring the Bridge to the Default SettingsStatus Lights Status Information Troubleshooting Tips Symptom Cause SolutionSymptom Solution Cause Environmental Specifications WGE101 System Requirements and SpecificationsBridge Specifications System Requirements for the BridgeStatement of Conditions Technical Support Support Information

WGE101 specifications

The NETGEAR WGE101 is a pioneering wireless gaming adapter that enables online gaming on consoles without the need for a wired connection. Designed primarily to support gaming consoles like the PlayStation 2, Xbox, and other Ethernet-enabled devices, this adapter bridges the gap between traditional gaming setups and modern wireless networking technologies. With its compact design and user-friendly setup, the WGE101 has become a popular choice among gamers seeking to enhance their gaming experience.

One of the key features of the NETGEAR WGE101 is its wireless compatibility. It operates on the IEEE 802.11b standard, providing a wireless connection with a maximum throughput of up to 11 Mbps. While this may seem modest by today’s standards, it was quite effective during the adapter's peak usage and sufficient for many online gaming applications. The WGE101 supports a range of wireless security protocols including WEP and WPA, ensuring a secure connection for users.

The setup process of the WGE101 is notably straightforward. It features a plug-and-play design, allowing users to connect it directly to their gaming console via an Ethernet cable. The built-in configuration utility simplifies the connection to the home Wi-Fi network, making it accessible even for those who may not be tech-savvy. Additionally, the WGE101’s compact size allows it to be conveniently placed near a gaming console without taking up much space.

The NETGEAR WGE101 also boasts advanced features such as QoS (Quality of Service) capabilities that prioritize gaming traffic over other types of data. This ensures that online gaming sessions can proceed smoothly without significant lag, even when other devices are using the network. Moreover, its ability to work seamlessly with a variety of routers enhances flexibility for users.

Furthermore, the WGE101 includes an LED indicator that provides real-time feedback on connection status, helping users troubleshoot potential connectivity issues. This added convenience is critical for gamers who desire uninterrupted gameplay.

In conclusion, the NETGEAR WGE101 wireless gaming adapter remains a noteworthy option for gamers looking to connect their consoles to the internet wirelessly. With its reliable performance, easy setup, and essential features tailored for gaming, the WGE101 has made a lasting impact in the realm of online gaming connectivity.
Top Page Image Contents