NETGEAR WGE101 manual Configuring the Bridge for Ad-Hoc Mode, Click Wireless Settings

Page 18

Configuring the Bridge for Ad-Hoc Mode

You may use this bridge in a wireless-only network where the wireless devices are all set to Ad- Hoc mode. By default, the bridge is set to Infrastructure mode; therefore, you’ll need to change the Network Type on the Wireless Settings page.

Note: In an Ad-Hoc network, all devices must have the same SSID, WEP settings, and IP network subset address with a unique identifying number (xxx.xxx.xxx.yyy).

1.Start your browser software.

2.Type http:// followed by the IP address for the bridge as the web address and press Enter (or Return).

Note: The default value is 192.168.0.201. If you’ve set the bridge to use DHCP, check the router table to find out what the current address is for the bridge.

3.Type admin as the User ID and type the current password. (password is the default.)

4.Click OK.

You’ll see the Status page.

5.Click Wireless Settings.

6.If you are setting up the Ad-Hoc network, type a SSID for the network in the SSID (Service Set Identifier) box.

OR

If the Ad-Hoc network already exists, select the correct SSID in the SSID (Existing network) list.

Note: You may also select the SSID on the Wireless Network Available page.

7.Select Ad-Hocas the Network Type.

8.Select the correct channel/frequency for the Ad-Hoc network.

9.Click Apply.

10.If you are through making changes, click Logout.

16

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Page Table of Contents Preparing to Install the WGE101 Bridge Package ContentsIntroduction Placement and Range Guidelines System RequirementsOperating Modes WGE101 Default Wireless Configuration Settings IP addressInstalling the WGE101 Bridge Connecting the Bridge to a Single DeviceConnecting the Bridge to Multiple Devices WGR614 54 Mpbs Wireless Router WGE101 54 Mbps Preparing To Configure the WGE101 Bridge Identifying Your Wireless Network SettingsConnecting the Bridge to a Computer Checking and Changing the Computer’s IP AddressPage Changing the Bridge’s IP Address Mac OS Choose System Preferences from the Apple  menuLinux and Unix Using the NetBIOS Name Click Apply Click LogoutConfiguring the WGE101 Bridge for Your Wireless Network Changing the Country/Region SettingClick Wireless Settings Selecting a Specific Wireless Network Changing the Bridge’s PasswordClick Change Password Wireless SettingsEnabling WEP Security Upgrading the Bridge Configuring the Bridge for Ad-Hoc Mode Setting the Bridge’s Data Rate WGE101 Bridge Status Lights and Settings Restoring the Bridge to the Default SettingsStatus Lights Status Information Troubleshooting Tips Symptom Cause SolutionSymptom Solution Cause Environmental Specifications WGE101 System Requirements and SpecificationsBridge Specifications System Requirements for the BridgeStatement of Conditions Technical Support Support Information

WGE101 specifications

The NETGEAR WGE101 is a pioneering wireless gaming adapter that enables online gaming on consoles without the need for a wired connection. Designed primarily to support gaming consoles like the PlayStation 2, Xbox, and other Ethernet-enabled devices, this adapter bridges the gap between traditional gaming setups and modern wireless networking technologies. With its compact design and user-friendly setup, the WGE101 has become a popular choice among gamers seeking to enhance their gaming experience.

One of the key features of the NETGEAR WGE101 is its wireless compatibility. It operates on the IEEE 802.11b standard, providing a wireless connection with a maximum throughput of up to 11 Mbps. While this may seem modest by today’s standards, it was quite effective during the adapter's peak usage and sufficient for many online gaming applications. The WGE101 supports a range of wireless security protocols including WEP and WPA, ensuring a secure connection for users.

The setup process of the WGE101 is notably straightforward. It features a plug-and-play design, allowing users to connect it directly to their gaming console via an Ethernet cable. The built-in configuration utility simplifies the connection to the home Wi-Fi network, making it accessible even for those who may not be tech-savvy. Additionally, the WGE101’s compact size allows it to be conveniently placed near a gaming console without taking up much space.

The NETGEAR WGE101 also boasts advanced features such as QoS (Quality of Service) capabilities that prioritize gaming traffic over other types of data. This ensures that online gaming sessions can proceed smoothly without significant lag, even when other devices are using the network. Moreover, its ability to work seamlessly with a variety of routers enhances flexibility for users.

Furthermore, the WGE101 includes an LED indicator that provides real-time feedback on connection status, helping users troubleshoot potential connectivity issues. This added convenience is critical for gamers who desire uninterrupted gameplay.

In conclusion, the NETGEAR WGE101 wireless gaming adapter remains a noteworthy option for gamers looking to connect their consoles to the internet wirelessly. With its reliable performance, easy setup, and essential features tailored for gaming, the WGE101 has made a lasting impact in the realm of online gaming connectivity.
Top Page Image Contents