User’s Guide for the WAB102 802.11a+b Dual Band Wireless Access Point
TCP/IP Configuration Parameters
CONFIGURATION | DESCRIPTION |
|
|
Access Point Name | The unique name represents the access point. |
| The default Access Point Name is located on |
| the bottom label of WAB102. You may modify |
| the default name with a unique name up to 15 |
| characters long. |
| Default: netgearxxxxxx, where xxxxxxx |
| represents the last 6 digits of the WAB102 MAC |
| address. |
IP Address | Specifies the IP address of the access point. |
| Default: 192.168.0.226 |
|
|
Subnet mask | Specifies the subnet mask of the access point. |
| Default: 255.255.255.0 |
|
|
Default gateway | Specifies the default gateway IP address. |
| Default: 0.0.0.0 |
|
|
DHCP Client | The access point will get the IP address, subnet |
| mask and the default gateway automatically |
| from the DHCP server if the DHCP is enabled. |
| Default: Enable |
|
|
If the WAB102 cannot locate a DHCP server upon powering up, it will default to the IP address of 192.168.0.226. If you are not sure of the IP address of the WAB102, restore the default IP address by pressing the Restore to Factory Default button located on the WAB102 back panel for at least 5 seconds. The WAB102 will pass the IP address from the DHCP server to the associated station if the DHCP client is enabled.
Setting Up Basic Wireless Connectivity | 17 |